Weider WESY47330 user manual Lubricate the four 56mm Round Bushings 53 with grease

Page 11

Arm Assembly

10.Attach the Leg Lever Bumper (60) to the Leg Lever Base (5) with an M4 x 25mm Self-tapping Screw (103) and an M4 Washer (104).

Press two 50mm Square Inner Caps (45) and two M10 Round Bushings (79) into the Leg Lever (7).

Lubricate an M10 x 85mm Bolt (96) with grease. Attach the Leg Lever (7) to the Leg Lever Base

(5) with the Bolt and an M10 Nylon Locknut (101).

Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.

11.Press two 50mm Square Inner Caps (45) into the Butterfly Frame (10).

Lubricate an M10 x 225mm Bolt (86) with grease. Attach the Butterfly Frame (10) to the Butterfly Upright (2) with the Bolt, two M10 Washers (99), and an M10 Nylon Locknut (101). Do not over- tighten the Locknut; the Butterfly Frame must be able to pivot easily.

Lubricate the four 56mm Round Bushings (53) with grease.

12.Identify the Left Butterfly Arm (11) by the position of the indicated bracket. Press a 50mm Round Inner Cap (52) and a 25mm Round Inner Cap

(76)into the Butterfly Arm.

Attach the Left Butterfly Arm (11) to the Butterfly Frame (10) with an M10 x 82mm Carriage Bolt

(93)and an M10 Nylon Locknut (101). Do not overtighten the Locknut; the Butterfly Arm must be able to pivot easily.

Repeat this step with the Right Butterfly Arm (12).

	10
			101
	Lubricate		45
	Lubricate
	96	60	79
	96	60	7
	5		7
		104	103
		104
			45
	11
	2
			Lubricate
	45		86
			86
			99
			53
	99		10
	99
	101
	53		53
			Lubricate
	12
			93
	10	101	11
		Bracket
	12
			76
			52

11

Image 11

Contents Customer HOT Line QUESTIONS?Model No. WESY47330 Serial No Table of Contents Decal Important Precautions Before YOU Begin DimensionsMake Assembly Easier for Yourself AssemblyFrame Assembly Locknuts yet Tighten the Locknuts yetPage Tighten the M10 Nylon Locknuts 101 used in steps 1-3 Repeat this step with the Right Butterfly Arm Lubricate the four 56mm Round Bushings 53 with greaseLocknuts yet. Make sure the warining decal is Repeat with the other Seat ArmOvertighten the Locknut the Press Arm must Press Base 3 in the same mannerTighten the M10 Nylon Locknuts 101 used Be between the Leg Press Brackets 16Page Page Page Page Trap is oriented to hold the Cable Groove of the Pulley Identify the Leg Press Cable 65. Attach101 100 Large Ball Sure the Cable Trap is oriented to hold Weight systemPage Seat Assembly Holes should Be closer to This end 101 Page Repeat this step with the other Butterfly Pin Using the LEG Lever Lock AdjustmentsChanging the Weight Setting Attaching the Accessories to a Pulley StationAttaching the Curl PAD Adjusting the SeatConverting the Butterfly Arms Bottom Weight Resistance ChartWeight LEG High Butter Press LOW Pulley FLY ARM Lever Lbs Left TopLeg Press Cable Cable DiagramsUpper Short Stack Cable Lower Short Stack CableAb Cable Lat CableButterfly Cable Tightening the Cables TroubleshootingPersonalizing Your Exercise Program Exercise GuidelinesFour Basic Types of Workouts Staying Motivated Muscle ChartCooling Down Thursday Aerobic Exercise Date Exercise Weight Sets RepsDate Aerobic ExerciseMonday Part Identification Chart Page Page Qty Description Part LIST-Model No. WESY47330Exploded Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty