Weider WESY47330 user manual Repeat this step with the other Butterfly Pin

Page 25

	65. Attach the tether on a Butterfly Pin (78) to the	65
	Butterfly Frame (10) with an M4 x 15mm Self-tap-	65
	Butterfly Frame (10) with an M4 x 15mm Self-tap-
	ping Screw (107).	78
		78
	Repeat this step with the other Butterfly Pin
	(78).	10
		10
		107
		78
	66. Attach the Curl Pad (29) to the Curl Post (28) with	66
	four M6 x 16mm Bolts (89).	66
	four M6 x 16mm Bolts (89).
		89
		89
		29
		28

67.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page.

Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on pages 29 and 30 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove the slack by tightening the cables. See TROUBLESHOOTING AND MAINTENANCE on page 31.

25

Image 25

Contents Model No. WESY47330 Serial No QUESTIONS?Customer HOT Line Table of Contents Decal Important Precautions Before YOU Begin DimensionsMake Assembly Easier for Yourself AssemblyFrame Assembly Locknuts yet Tighten the Locknuts yetPage Tighten the M10 Nylon Locknuts 101 used in steps 1-3 Repeat this step with the Right Butterfly Arm Lubricate the four 56mm Round Bushings 53 with greaseOvertighten the Locknut the Press Arm must Repeat with the other Seat ArmPress Base 3 in the same manner Locknuts yet. Make sure the warining decal isTighten the M10 Nylon Locknuts 101 used Be between the Leg Press Brackets 16Page Page Page Page Trap is oriented to hold the Cable Groove of the Pulley Identify the Leg Press Cable 65. Attach101 100 Large Ball Sure the Cable Trap is oriented to hold Weight systemPage Seat Assembly Holes should Be closer to This end 101 Page Repeat this step with the other Butterfly Pin Changing the Weight Setting AdjustmentsAttaching the Accessories to a Pulley Station Using the LEG Lever LockConverting the Butterfly Arms Adjusting the SeatAttaching the Curl PAD Weight LEG High Butter Press LOW Pulley FLY ARM Lever Weight Resistance ChartLbs Left Top BottomUpper Short Stack Cable Cable DiagramsLower Short Stack Cable Leg Press CableButterfly Cable Lat CableAb Cable Tightening the Cables TroubleshootingFour Basic Types of Workouts Exercise GuidelinesPersonalizing Your Exercise Program Cooling Down Muscle ChartStaying Motivated Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateMonday Part Identification Chart Page Page Qty Description Part LIST-Model No. WESY47330Exploded Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT