Weider WESY47330 user manual

Page 9

5.Slide two Weight Bumpers (71) onto the Weight Guides (18).

Slide eight Weights (22) onto the Weight Guides (18). Make sure the Weights are oriented with the pin grooves on the side shown.

Press a Weight Tube Bumper (54) into the Long Weight Tube (23). Insert the Long Weight Tube into the Weights (22).

Lubricate the indicated holes in a Top Weight (25) with grease. Slide the Top Weight onto the Weight Guides (18). Make sure the pin on the Long

Weight Tube (23) rests in the grooves in the bottom of the Top Weight.

6.Slide two Weight Bumpers (71) onto the Weight Guides with Rings (19).

Slide the Bottom Weight (21) onto the Weight Guides with Rings (19). Make sure the Weight is oriented with the pin groove on the side shown.

Slide five Weights (22) onto the Weight Guides with Rings (19). Make sure the Weights are ori- ented with the pin grooves on the side shown.

Press a Weight Tube Bumper (54) into the Short Weight Tube (24). Slide the Short Weight Tube into the Weights (22).

Lubricate the indicated holes in the other Top Weight (25) with grease. Slide the Top Weight onto the Weight Guides with Rings (19). Make sure the pin on the Short Weight Tube (24) rests in the grooves in the bottom of the Top Weight.

5	18	25
		25
		Lubricate
		Pin
		23
		54
	Pin
	Groove
		22
		71
6		25
		25
	Lubricate
	Pin
	24
	54
	22
	Pin
	Groove
	21
	Pin
	Groove
	71
	19

9

Image 9

Contents QUESTIONS? Model No. WESY47330 Serial NoCustomer HOT Line Table of Contents Decal Important Precautions Before YOU Begin DimensionsMake Assembly Easier for Yourself AssemblyFrame Assembly Locknuts yet Tighten the Locknuts yetPage Tighten the M10 Nylon Locknuts 101 used in steps 1-3 Repeat this step with the Right Butterfly Arm Lubricate the four 56mm Round Bushings 53 with greaseOvertighten the Locknut the Press Arm must Repeat with the other Seat ArmPress Base 3 in the same manner Locknuts yet. Make sure the warining decal isTighten the M10 Nylon Locknuts 101 used Be between the Leg Press Brackets 16Page Page Page Page Trap is oriented to hold the Cable Groove of the Pulley Identify the Leg Press Cable 65. Attach101 100 Large Ball Sure the Cable Trap is oriented to hold Weight systemPage Seat Assembly Holes should Be closer to This end 101 Page Repeat this step with the other Butterfly Pin Changing the Weight Setting AdjustmentsAttaching the Accessories to a Pulley Station Using the LEG Lever LockAdjusting the Seat Converting the Butterfly ArmsAttaching the Curl PAD Weight LEG High Butter Press LOW Pulley FLY ARM Lever Weight Resistance ChartLbs Left Top BottomUpper Short Stack Cable Cable DiagramsLower Short Stack Cable Leg Press CableLat Cable Butterfly CableAb Cable Tightening the Cables TroubleshootingExercise Guidelines Four Basic Types of WorkoutsPersonalizing Your Exercise Program Muscle Chart Cooling DownStaying Motivated Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateMonday Part Identification Chart Page Page Qty Description Part LIST-Model No. WESY47330Exploded Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT