Weider WESY47330 user manual

53. Wrap the Ab Cable (66) under a 100mm Pulley	53
(38). Attach the Pulley and a Long Cable Trap
(68) to the Butterfly Upright (2) with an M10 x		66
50mm Bolt (81) and an M10 Nylon Locknut (101).			38
Make sure the Cable Trap is oriented to hold
		68	81
the Cable in the groove of the Pulley.
	101
		2
54. Wrap the Ab Cable (66) over a 100mm Pulley	54
(38). Attach the Pulley and a Long Cable Trap
(68) to the indicated hole in the indicated “U”-
bracket (40) with an M10 x 50mm Bolt (81) and		40		101
an M10 Nylon Locknut (101). Make sure the
Cable Trap is oriented to hold the Cable in the		81		68
groove of the Pulley.
				38
				66
55. Wrap the Ab Cable (66) under a 100mm Pulley	55
(38). Attach the Pulley to the Butterfly Upright (2)
				2
with an M10 x 45mm Bolt (51) and an M10 Nylon
				101
Locknut (101).
	51
		38	66
56. Route the Ab Cable (66) over a 100mm Pulley	56
(38) and through the Butterfly Upright (2). Attach
the Pulley inside the Upright with an M10 x 65mm
Bolt (80), two M10 Washers (99), two 12.5mm
Spacers (69), and an M10 Nylon Locknut (101).
	38
				80
	99			99
				69
		69	2	66
	101
	21