Cleaning and care
Risk of personal injury!
ALWAYS remove the plug 7 before cleaning the appliance.
There is a risk of electric shock! Allow the appliance to cool down. Risk of Burns!
CAUTION!
Never use aggressive cleansers. These can damage the surfaces.
•Clean the housing with a soft, dry cloth only.
•Clean the metal components with a lightly water- moistened cloth and a mild,
Scale removal
Should the steam output diminish over a period of time, decalcify the steam brush.
•For decalcification use a standard commercial descaling agent based on citric acid. Proceed as detailed in the product instructions.
Storage
Attention!
Remove the plug 7 from the power socket and allow the appliance to cool down before putting it into storage.
Risk of fire!
Store the appliance at a dry location. You can also hang the appliance up by the suspension eye 6.
Troubleshooting
The steam brush ejects no or very little steam:
The supply of water in the steam brush is exhausted. Fill the water tank 1 with water (See "Filling with water").
The steam brush does not heat itself up:
The appliance is not connected to mains power. Insert the plug 7 into a wall power socket and set the desired temperature with the temperature regulator 3.
The steam brush is defective. Arrange for the ap- pliance to be repaired by a qualified specialist.
The power socket is defective. Try another wall socket.
Disposal
Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC.
Dispose of the appliance through an approved dis- posal centre or at your community waste facility. Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally responsible manner.
- 7 -