Rinse & Spin
Use this cycle to get a rinse and spin only. This cycle combines
Rinse & Spin is useful for
•Loads that need rinsing only.
•Adding fabric softener to a load using the fabric softener dispenser.
Drain & Spin
Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is preset to high. If desired, you can reduce the spin speed by selecting the speed you want from the SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, handwashables, and woolens should be drained with no spin or low spin to avoid fabric stress.
As with any new product, you will hear sounds that you are not accustomed to. You may hear various sounds when the door is locked and unlocked and during the washing, rinsing, and spinning process. Between changes in wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles. These new sounds and pauses are part of normal washer operation. See "Troubleshooting."
You can customize your wash by adding OPTIONS to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all Options are available with all cycles.
OPTIONS
PREWASH
EXTENDED SPiN
ENDof CYCLE
SIGNAL
OH I OfF
See the "Laundry Guide" section for an overview of possible options for each Wash Cycle selection.
You can select more than one option for a cycle. Some options cannot be added to some cycles.
If an option is available with a selected cycle, the light for that option will glow when selected.
If an option is unavailable with a selected cycle, there will be a short tone, and the light for that option will not glow when selected.
Prewash
Use this option for loads of heavily soiled garments that need pretreatment.
•Add detergent to the Main Wash Compartment of the Dispenser Drawer.
This option adds tumbling time prior to the selected main cycle. The washer continues automatically from prewash into the main wash cycle.
Extended Spin
Use this option to add an additional spin to any cycle to improve drying times for some heavy fabrics or
End of Cycle Signal
This signal is helpful when you are removing items from the washer as soon as it stops. Select ON or OFR
Preset cycle settings of Wash/Rinse Temp, Spin Speed, and Soil Level can be changed. You can change a modifier after starting a cycle anytime before the selected modifier begins. Not all Modifiers are available with all options and cycles.
MODIFIERS
RUT!9 TtMP COMR0!
o EXTRA HOTI COLD • NIGH
O | HOT | /COLD | O _4EOtUM |
|
• WARM/WARM | o LOW |
| ||
® | WAffM / COLD | o EXTRA LOW |
| |
• | COLD | / COLD | @ NO SPIN |
|
|
|
|
| \. / |
WATER | TEMP | SPIN SPEED | RINSE | |
| WASfl i | RI_S |
| OPTIONS |
To change the water temperature, select the WATER TEMP button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button until the desired setting glows.
•HEAVY
•NORMAL
•LIGHT
SOIL LEVEL
•To change cycle time, select SOIL LEVEL button.
2nd Rinse
A second rinse can be used to aid in the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the first rinse. This is the default rinse setting for the Whitest Whites cycle.
Normal Rinse
Consists of a two phase rinsing process that is effective for everyday laundry.
16