Recommended installation spacing for recessed or closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48irk 2 *
(310 cm 2)
3" (7.6 cm)
O
Z_
3" (7.6 cm)
24 in_2 *
(155cm2) | |
|
|
| /J |
| |
| 76" |
|
|
|
| (193 cm) |
|
|
|
|
| 'ty |
| |
5½"**==_ |
|
|
|
|
(14era) | (2.5era) | (g&a | cm) | (2_5 cra) |
*Min. top and bottom air openings for closet doo_:
**External exhaust elbow requires additional space.
***Wall, door and floor molding may require additional spacing.
Recommended installation spacing for cabinet installation
•The dimensions shown are for the recommended spacing.
•For cabinet installation, with a door, the minimum ventilation openings in the top are required.
(17.8cm) 7" (17.8cm)
_9"
, (22.cm)9
4 31Y_ 1
(10.2cm) (80.0cm) (2.5cm) (2.5cm) (68.6crn) (2.5cm)
The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose installation method you need. See "Tools and Parts."
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum
The top of the standpipe must be at least 30" (76.2 cm) high and no higher than 96" (2.4 m) from the bottom of the washer.
30" min: (76.2 cm)
A
Laundry tub drain system (view A)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 30" (76.2 cm) above the floor.
Floor drain system (view B)
The floor drain system requires a siphon break that may be purchased separately. See "Tools and Parts."
The siphon break must be a minimum of 28" (71 cm) from the bottom of the washer. Additional hoses might be needed.
A