Kenmore 110.4597, 110.4596 manual Installation Requirements

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

•Pliers (that open to 19/16"[39.5 mm])

•Flashlight (optional)

Tools needed for installation

•Open end wrench 17 mm and 13 mm

•Level

•Wood block

•Ruler or measuring tape

Parts supplied

Beaded strapTransport bolt hole plug (4)

Alternate Parts

Parts listed are available from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME® (1-800-469-4663}.

If You Have			You Will Need to Buy
Laundry tub or			Sump pump system (if not already
standpipe		taller	available)
than 96" (2.4 m)
Overhead		sewer	Standard	20 gal. (76 L), 30" (76.2 cm)
			tall drain tub or utility sink and sump
			pump (available from local plumbing
			suppliers)
Floor	drain		Siphon break, Part Number 285834;
			additional	drain hose Part
			Number 8318155; and connector kit,
			Part Number 285835
Drain	hose too		4 ft (1.2 m) drain hose extension kit, Part
short			Number	285863
Water	faucets		2 longer water fill hoses:
beyond reach of			6 ft (1.8 m) Part Number		76314,
fill hoses			10 ft (3.0 m) Part Number		350008

Pedestal

You have the option of purchasing a pedestal for this washer. This will add to the total height of your washer.

Optional Pedestal

This pedestal (with storage drawer) is available in three colors.

To order, call your local Sears store. For further information,

please call1-800-4-MY-HOM				E® (1-800-469-4663).		Part	i! i
Pedestal		Approximate			Color
Height		height with				Number
		washer
13" (33	cm)	51" (130 cm)			White	42842
13" (33	cm)	51" (130	cm)		Bisque	42844
13" (33	cm)	51" (130	cm)		Graphite	42846

Stack Kit

Are you planning to stack your Kenmore washer and dryer? To do so, find the stack kit (8541503) in the drum of the matching Kenmore dryer. Follow instructions included with the kit.