Sigma EM-140DG manual Multi Flash Mode, Wireless Flash SD10 only, Master unit Setting EM-140 DG

Page 22

MULTI FLASH MODE

While the shutter is open, the flash will fire repeatedly. By doing so a series of images of the subject will be exposed in one frame. A dark background with a bright subject shows more effectively in this mode. It is possible to set the firing frequency between 1Hz and 199Hz. Up to 90 flashes can be fired continuously. The maximum number of flashes varies, depending on the flash guide number and firing frequency settings. (Please refer to table3 on the last page).

1.Set the camera’s exposure mode to M mode, and set the F number

2.Press the MODE button until the Multi-flash mode appears

3.Press the SEL button until the flash firing frequency starts to blink.

4.Press the + or - button to set the desired flash frequency value.

5.After pressing the SEL button again, the flash power level will blink.

6. Press the

+

or

-

button to set the desired power level.

7. Press the

 

button again, the number of flashes will blink.

SEL

8. Press the

 

or

 

button to set the desired number of flashes.

+

-

9.Press the SEL button again, the display will stop blinking.

10.When the ready light of the flash is illuminated, the unit is ready to use.

Note: Please set the shutter speed longer than; Number of Flashes you want ÷ Firing Frequency

WIRELESS FLASH (SD10 ONLY)

It is possible to use Wireless Flash photography if this flash unit is used as a master flash and the EF-500 DG SUPER SA-STTL (SA-N) as slave light source.

Master unit (EM-140 DG) fires just for controlling the Slave unit, and does not influence photography.

Control System Change (EF-500 DG SUPER SA-STTL (SA-N))

1.Attach the flashgun to the camera and turn on the power switch of the flashgun and camera.

2.Press the shutter button of camera halfway. (The camera and flashgun communicate and control system will be switched automatically.)

3.Turn off the power switch of the flashgun and camera.

Slave unit Setting (EF-500 DG SUPER SA-STTL (SA-N))

1.Press the MODE button to select .

2.Press SEL button, to make the channel indicator blink, on the display.

3. Press + or – button to set the desired channel number.

4.Press the SEL button several times until the indicator stops blinking.

5.Place the Slave unit at the desired position.

Master unit Setting (EM-140 DG)

6.Attach the flash unit to the camera.

7.Press the MODE button to select ⁄ mark.

8.Press SEL button, to make the channel indicator blink on the display.

9.Press + or – button to choose the same channel number as set on the Slave unit.

10.Press the SEL button several times until the display stops blinking.

11.Check that both flashes are fully charged.

Ready light lamp will light, and the AF Auxiliary lamp will blink to indicate that the flash is ready for shooting.

12. Adjust the focus on the subject, and take the picture.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents EM-140DG Page 上 の ご 注 意 に つ い て の 名 称（1ページ）可 能 な レ ン ズ に つ い て の 入 れ 方Page パ ネ ル の 照 明 部 の 取 り 付 け 方ラ ン プ Page TTL撮影 各撮影 モード での フラ ッシュ 撮影Page 撮 影 時 の ご 注 意 ュ ア ル 発 光 撮 影シ ン ク ロ 撮 影 リ ン グ 発 光補 正 チ 発 光 撮 影 ヤ レ ス 撮 影（ SD10のみ）Page ス レ ー ブ 発 光 主要諸元Precautions Description of the Parts About the BatteryBattery Loading Lens UsabilityLCD Panel Illumination Attaching the Controller UnitAttaching the Flash Unit Auxiliary LightSD series Shutter Speed Priority SettingAperture Priority Setting SA seriesLimits of Continuous Shooting When used with M ModeMode Number of Flash Exposures Manual Flash OperationModeling Flash Second Curtain SynchronizationExposure Compensation Slave unit Setting EF-500 DG Super SA-STTL SA-N Multi Flash ModeWireless Flash SD10 only Master unit Setting EM-140 DGSetting for Slave Controller unit EM-140 DG SpecificationsSetting the Slave Flash units for firing EF-500 Designated Slave FlashVorsichtsmaßnahmen DeutschBatteriehinweise Beschreibung der TeileVerwendbarkeit von Objektiven Einlegen der BatterienBeleuchtung DER LCD Anbringen der SteuereinheitAnbringen der Blitzeinheit AF HilfslichtTTL Blitzautomatik SA SerieGrenzen der Serienauslösung Manueller BlitzbetriebEinstelllicht Kurzzeitblitzsynchronisation FP außer SA-300Synchronisation auf den zweiten Verschlussvorhang Leitzahl / Entfernung zwischen Blitz und Motiv = BlendeKabelloses Blitzen Nur SD10 BelichtungskorrekturStroboskopbetrieb Wechsel der Systemsteuerung EF-500 DG Super SA-STTL SA-NEinstellung Master Einheit EM-140 DG Kabellose Zündung bestimmter „Slave GeräteEinstellung Slave Einheit EF-500 DG Super SA-STTL SA-N Einstellung der blitzenden Geräte EF-500Technische Daten Français Alimentation Electrique Description DES ElementsAdaptation AUX Objectifs Mise EN Place DES PilesRetro Eclairage DE Lecran LCD Mise EN Place DU Module DE ContrôleMise EN Place DU Module Flash Lampe DassistanceSérie SD Mode de priorité à la vitesseMode de priorité à louverture Série SAMode Nombre déclairs Mode Operatoire EN Flash ManuelMode manuel M Limites DES Prises DE VUE Consecutives AU FlashFlash Predictif Synchronisation SUR LE Deuxieme RideauCorrection Dexposition Réglage du flash asservi EF-500 DG Super SA-STTL SA-N Mode DE Flash Stroboscopique Multi FlashFlash Sans Cordon Pour SD10 Réglage du flash maître EM-140 DGFlash Esclave Désigné Caracteristiques TechniquesPrecauciones EspañolAcerca DE LAS Pilas Descripción DE LAS PartesUSO CON Objetivos Carga DE LAS PilasIluminación DE LA Pantalla LCD Adaptar LA Unidad DE ControlAdaptar LA Unidad DE Flash LUZ DE ModeladoSéries SD Flash Automático TTLAjuste para la prioridad de velocidad Séries SAAjuste para prioridad de diafragma Limitaciones DEL Disparo ContinuoFlash Manual Cuando se utiliza con el Modo MSincronización CON LA Segunda Cortinilla Compensación DE ExposiciónFlash Inalámbrico Solo SD10 Sistema de Control de Cambios EM-140 DGModo DE Multi Flash Estroboscópico Número de disparos que quiere / Frecuencia de disparoFlash Esclavo Designado EspecificacionesDescrizione Delle Parti AttenzioneUnità di controllo Batteria Compatibilità ObiettiviCaricamento Delle Batterie Illuminazione DEL Display LCD Inserimento DELL’UNITÀ DI ControlloInserimento DEL Flash Illuminatore AusiliarioRegolazione a Priorità DEI Tempi SA serieFP Flash Flash AD Alta Velocità Eccetto SA-300 Limitazioni Quando SI Scatta in SequenzaFlash Manuale Modalità Numero di esposizioni flashCompensazione DELL’ESPOSIZIONE Sincronizzazione Della Seconda TendinaFlash DI Riempimento Modalità Multi FlashRegolazione dello Slave EF-500 DG Super SA-STTL SA-N Regolazione del Master EM-140 DGImpostare i flash per lo scatto EF-500 Scegliere I Flash SecondariSpecifiche Impostare il flash principaleEM-140 DG 意 位 名 稱電 池 鏡 頭閃 燈 控 制 部 環直至不能再轉時，然後才可把閃光燈抽出。 輔 助 光 閃 燈 部顯 示 屏 夜 光 照 明 TTL自 動 閃 燈 功 能若模式經轉換或閃光輸出比選定為11，此功能將失效和取消 連 發 限 制 調 控 閃 光 操 作，設定右閃光管輸出值 若提示為〝- -〞，右閃光管將不發射 SEL 鈕，讓眨動停止 簾 幕 後 簾 閃 燈 同 步 FP高 速 快 門 閃 燈 同 步 SA-300除 外模 擬 閃 燈 控 閃 光 只 適 用 於 SD10） 補 償模 式 系 息 互 通 EF-500 DG Super SA-STTLSA-N將閃燈移除，安放在欲放置的位置前燈前對焦輔助燈將不停閃動。 誘 發 燈 EM-140 DG 串 從 屬 SLAVE無 線 控 閃 兄從 屬 閃 光 燈 觸 發 程 序 EF-500 DG Super SA-STTLSA-N マルチ発光/MULTI Flash Mode EM-140DG Deutsch Sigma Deutschland GmbH
Top Page Image Contents