1W Transfer Wave Transfer Wave To Midi Track, Stereo file

To hear the sound of the speciﬁed region, press the SAMPLING [START/STOP] key. The region speciﬁed by “Start” and “End” will play back when you press the SAMPLING [START/STOP] key.

9If you press the Stretch button, the Time Stretch dialog box will appear, and you can re-do the time stretch once again. Execute Time Stretch as described in step 5 and 6.

0Save the time stretched data. Press the Save button to display the Save dialog box.

AIf you check “Overwrite.WAV” the results of executing the command will overwrite the WAVE ﬁle assigned to the audio track. If this is not checked, executing the com- mand will create a new WAVE ﬁle, and the audio track assignment will be updated, and replaced by the newly created WAVE ﬁle. If a new ﬁle will be created, use “Name” to specify a name for the ﬁle.

The page menu command “Sel Dir/WAVE (Audio Track)” speciﬁes the save-destination of the newly cre- ated WAVE ﬁle.

BTo save, press the OK button. If you decide not to save, press the Cancel button.

By repeating steps 9–B you can create more samples as desired.

CPress the Exit button to exit the Time Stretch operation.

5–1W: Transfer WAVE (Transfer WAVE To MIDI Track)

Using this command, the WAVE ﬁle assigned to the audio track can be re-assigned to a MIDI track.

The WAVE ﬁle will be loaded into sample memory (RAM), and sample, multisample, and program data will be created

automatically. The automatically created program will be assigned to a MIDI track, and note data will be automati- cally created on that MIDI track. (See diagram below.)

When you play back after executing this command, the per- formance previously played by the audio track will be played back by the MIDI track. You can use Sampling mode commands such as Time Slice to edit the data in sample memory (RAM).

By using this command to transfer an audio track perfor- mance to a MIDI track, you can free up the audio track(s) for recording other instruments.

1Use “Track Select” to select the audio track whose per- formance you will transfer to a MIDI track.

2Choose “Transfer WAVE” to open the dialog box.

3In the “From: Audio Track” ﬁeld, select the audio track that you want to transfer to a MIDI track.

4Specify the destination song number in the “To: Song” ﬁeld, the destination track in “Track,” and the number of the automatically-created program in “Program.”

5To execute “Transfer WAVE,” press the OK button. If you decide to cancel, press the Cancel button.

The multisample and sample(s) will automatically be cre- ated in vacant numbers. A program will be automatically created in the number you speciﬁed for “Program,” and assigned to the song track you speciﬁed in “Song” and “Track.” Then the appropriate note data will be automat- ically created in the track.

If a single track exceeds 16 Mbytes, the WAVE ﬁle will automatically be divided.

Sequencer

Example of using Transfer WAVE to MIDI Track: From Audio Track: 1&2, To Track: 1, Program: I-E000
Song (16 measures)		001.01.000				016.04.191
Song (16 measures)
HD Audio Track 1		Guitar 1 (Mono)				Stereo WAVE file
						Stereo WAVE file
HD Audio Track 2		Guitar 2 (Mono)				Example:
						40 MB [20 MB (L) + 20 MB (R)]
			16MB→	RAM1	4MB→	RAM3
						Stereo file
			16MB→	RAM2	4MB→	RAM3
Sample is automatically
created
Multisample is
automatically created
		C2	C#2
Program is automatically						Appropriate note data is
created						automatically created
MIDI Track 1	[I-E000]	C2			C#2
MIDI Track 16
						23