Korg V2 manual Swing Quantize Parameter, 1L Copy From Program, 1N Quantize Swing 300%...+300%

Copy From Program

“Copy From Program” has been added to the page menu commands of the Sequencer P0: Play/REC page and related pages.

0–1L

0–1L: Copy From Program

Copies the settings from a specific program to a track or effect in the currently selected song.

1Select “Copy From Program” to open the dialog box.

•“Status” (2–1(2)a ☞PG p.62) will automatically be set to INT.

•If the copy-source is an INT-F bank program, the “Voice Allocation Reserve” (☞EM p.47) setting of the copy-destination track will be automatically set to 6, and the “Voice Allocation Reserve” of other tracks will be set to 0. “MOSS BUS Select Reference” (☞EM p.47) will be automatically set to the copy- destination track.

•The 1–4: Controller (☞PG p.12) settings of the copy- source program will be copied.

6Use the “Arpeggiator” field to specify the copy-destina- tion arpeggiator.

7Press the OK button to execute the copy. If you decide not to execute, press the Cancel button.

Add the contents of “Copy From Program” to the “Parameter Guide” Sequencer P0: Play/REC page menu commands (☞PG p.52).

Sequencer

2Use “Program” to select the copy-source program.

3If you check “with Effects,” the insert effect, master effect, and master EQ settings will also be copied. The “Control Channel” of each effect will be set to the MIDI channel of the copy-destination track.

About the “BUS Select (IFX/Indiv.Out BUS Select)” (8– 1(2)b ☞PG p.83) setting

•Regardless of the “with Effects” setting, “BUS Select” will be set to DKit if the “Use DKit Setting” of the copy-source program is checked. In conjunction with this, the “DrumKit IFX Patch” (☞PG p.46) setting will be reset to the default state.

•If “with Effects” is checked, the “BUS Select” setting of the copy-source program will be copied. If the “BUS Select” of any track (other than the copy- destination track) is set to IFX1–IFX5, the “BUS Select” setting for that track will automatically be set to L/R.

•If “with Effects” is unchecked, then the copy-source“BUS Select” setting will be ignored. If the copy- destination track “BUS Select” are was set to IFX1– IFX5, it will automatically be set to L/R.

4If “with Arpeggiator” is checked, the arpeggiator set- tings of the copy-source program will be copied to the arpeggiator you specify in step 6. In conjunction with this, check “Arpeggiator Run” for the arpeggiator you specify in step 6, and set “Arpeggiator Assign” of the copy-destination track to the arpeggiator you specify in step 6.

5In the “To” field, specify the copy-destination track. The parameters of each track will be initialized. “Pro- gram Select” (0–1(2)c will be set to the copy-source pro- gram.

•“MIDI Channel” and “Bank Select (When Status=EX2)” (2–1(2)a ☞PG p.63) settings will not change.

Swing Quantize Parameter

A “Swing” parameter has been added to the Sequencer P5: Track Edit page menu command “Quantize” (☞PG p.73).

5–1N: Quantize

Swing [–300%...+300%]

This adds a feeling of “swing” to the rhythm. For example, it can be used to transform a square 16-beat into a subtle shuf- fle groove.

With settings other than 0%, the location of even-numbered notes will be adjusted by the amount specified in “Resolu- tion” to apply a swing feel to the rhythm.

With a setting of +100%, the notes will be moved 1/3 of the distance of the specified “Resolution.” With a setting of +300%, even-numbered notes will be moved all the way to the location of the next odd-numbered beat.

When “Resolution” =
beat 1	2	3	4
	0%

“Swing” = 0%

+100%

“Swing” = +100%

–100%

“Swing” = –100%

+200%

“Swing” = +200%

“Swing” = +300%

+300%

Add the contents of the “Swing” parameter to “Parameter Guide” 5–1N: Quantize (☞PG p.73).

43