Summit 89208 Sear Station Burner Lighting, Adjacent Main Burner Snap Ignition, To Extinguish

Page 16

16

operating Instructions

SEAR STATION™ Burner Lighting

Summary lighting instructions are inside the left hand cabinet door.

mDANGER

Failure to open the lid while igniting the barbecue’s burners, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up which can cause serious bodily injury or death.

The Sear Station™ burner has an on or off control setting. To ignite the Sear Station™ burner you must first ignite the two adjacent main burners.

ARRÊTÉ

EN MARCHE

OFF

ON

APAGADO

ENCENDIDO

B

A

B

A

OFF

ON

Adjacent Main Burner Snap Ignition

Note: Each main burner control knob snap igniter creates a spark from the igniter electrode to the burner lighting tube.You generate the energy for the spark by pushing in the control knob and turning to“START/HI”.This will ignite each individual burner.

mWARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

Log onto www.weber.com®.

1)Open the lid.

2)Make sure all burner control knobs are turned off. (Push control knob in and turn clockwise to ensure that it is in the “OFF” position.)

3)Turn on the gas supply at source.

mWARNING: Do not lean over the open barbecue.

4)Ignite each adjacent Sear Station™ main burner. Push the control knob in and turn to “START/HI” until you hear the igniter snap - continue to hold control knob in for two seconds. This action will spark the igniter, the burner lighting tube and then main burner.

5)Check that the burner is lit by looking through the cooking grates. You should see a flame. If burner does not light on first try, push control knob in and turn to OFF. Repeat lighting procedure a second time.

To ignite the Sear Station™ burner continue with Step 6.

Sear Burner Lighting: Ignition by an adjacent ignited Main Burner.

6)Turn -Sear Station™ burner control knob to the ON position.

7)Verify burner ignition by visual inspection of a flame.

mWARNING: If ignition does not occur in 5 seconds, turn burner control OFF, wait 5 minutes, and repeat steps 6 & 7, or see Match Lighting instructions.

mWARNING: If the burner still does not light, turn the burner control knob to “OFF” and wait 5 minutes to let the gas clear before you try again or try to light with a match.

Note: See Maintenance for burner removal and cleaning procedure.

1

5 7

2

4

6

* The grill illustrated may have slight

3

differences than the model purchased.

 

26

EN MARCHE

ON

ENCENDIDO

To Extinguish

Push in and turn each burner control knob clockwise to “OFF” position. Turn gas supply off at the source.

www.weber.com®

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Gas Grill 2warnings Liquid Propane GAS Units onlyPara compras hechas en México Exploded View S 670TM Exploded View List S 670TM GAS Supply Testing General InstructionsInstall Gas Supply General Specifications for PipingGas Instructions GAS Line PipingWhat is Natural GAS? Portable InstallationType of GAS Leak Check PreparationCheck the flexible hose to manifold connection Check Reinstall control panelMain gas line to manifold connection Lighting Operating Instructions To ExtinguishArrêté Apagado OFF START/HI MEDDirect cooking OFF START/HI MEDIndirect cooking Grilling Tips & Helpful Hints Bright sunny dayTo Use the Sear Station Sear StationSear Station Burner Lighting Adjacent Main Burner Snap IgnitionTo ignite the Sear Station burner continue with Step To ExtinguishUsing the Smoker Cleaning the SmokerTo USE the Smoker Apagado EN Marche EncendidoLighting the Smoker Burner Manually Lighting the Smoker Burner Operating Cooking Rotisserie Motor StorageLighting the Rotisserie Burner Rotisserie Burner Snap IgnitionManually Lighting the Rotisserie Burner Lighting Rotisserie BurnerTroubleshooting Side Burner TroubleshootingProblem Check Cure Aluminum foilSide Burner Maintenance Rotisserie TroubleshootingSide Burner maintenance OFF position Rotisserie burner does not lightSear Burner Troubleshooting Operating the Handle LightWeber Grill Out Handle Light does not lightWeber SPIDER/INSECT Screens MaintenanceTurn off the gas supply Replace Main Burners Annual Maintenance Inspection and Cleaning of the SPIDER/INSECT ScreensRemoving the sear Station Burner Burner Flame PatternBarbacoa de gas Peligro AdvertenciasÚnicamente Unidades DE GAS Propano Licuado Instrucciones generales AlmacenajeMétodos de asar a la parrilla Para la instalación en CanadáInstrucciones sobre el gas Instale el suministro de gasEspecificaciones generales de la tubería Instalación de la tubería de gasTipo DE GAS ¿QUÉ ES EL GAS NATURAL?Instalación Transportable Preparativos Para LA Búsqueda DE FugasRevise la manguera flexible a la conexión del múltiple Verifique Vuelva a instalar el panel de controlLa barbacoa ilustrada Instrucciones de operación Advertencia No se incline sobre la barbacoa abiertaEncendido Manual DEL Quemador Principal Apagado OFFMétodos para asar OFF Start MEDCocción directa Cocción indirectaConsejos prácticos para asar Para usar la estación para dorar Sear Station Encendido DE Acción Rápida DEL Quemador Principal Adyacente Para ApagarEncendido Manual DEL Quemador DE LA Estación Para Dorar Sear Station Peligro Para Usar EL AhumadorLa barbacoa Encendido manual del quemador del ahumador Uso del asador giratorioMedidas preventivas importantes Advertencias Este asador giratorio debe usarse solamente al aire libreInstrucciones de operación Almacenaje DEL Motor DEL Asador Giratorio Encendido del quemador del asador giratorio Encendido rápido del quemador del asador giratorioEncendido Manual DEL Quemador DEL Asador GiratorioAtención Léalo Antes DE Encender EL Quemador DEL AsadorResolución de problemas con el quemador lateral Resolución de problemasProblema Revisar Remedio Resolución de problemas con el asador giratorio Mantenimiento del quemador lateralEl quemador del asador giratorio no Se enciendeResolución de problemas del quemador para dorar Operación de la luz del asaAntes de intentarlo de nuevo La lámpara del asa Weber Grill OutMantenimiento Reemplace los quemadores principales Cómo Sacar EL Quemador DE LA Estación Para Dorar Sear StationMantenimiento Anual Patrón DE LA Llama DEL QuemadorGrill a GAZ Mises EN Garde Appareils a GAZ Propane UniquementTest DE L’ALIMENTATION EN GAZ UtilisationNettoyage InstallATION DE L’ALIMENTATION EN GAZ Spécifications générales relatives à la canalisationTest des raccords Conduite de gazInstructions Relatives AU GAZ Instructions Relatives AU GAZ ReMISE EN Place DU Panneau DE Commande VérifiezUtilisation DU Bouton D’ALLUMAGE Ouvrez toujours le couvercle avant d’allumer les brûleursAllumage Bouton D’ALLUMAGE DU Bruleur PrincipalPour Eteindre Instructions Pour L’UTILISATIONAllumage Manuel DU Bruleur Principal Cuisson Directe Cuisson IndirectePréchauffage Cuisson CouverteAstuces & Conseils Utiles Pour LES Grillades Allumage DU Bruleur LateralAllumage Manuel DU Bruleur Lateral Brûleur latéral par une journée claire et ensoleilléeUtilisation DU Bruleur Sear Station Pour Utiliser LE Brûleur Sear StationAllumage Automatique DES Bruleurs Principaux Adjacents Allumage DU Bruleur Sear StationPour allumer le brûleur Sear Station continuez avec l’Etape Allumage Manuel DU Bruleur Sear Station Utilisation DU FumoirPour Utiliser LE Fumoir Nettoyage DU FumoirAllumage DU Bruleur DU Fumoir Allumage DU Bruleur DU Fumoir Avec LE BoutonPrecautions DE Securite ImportantES Mises EN Garde ALLUMAGE Manuel DU Bruleur DU FumoirUtilisation DE LA Rotissoire Ouvrez le couvercleUtilisation Cuisson Stockage DU Moteur DE LA RotissoireMise EN Garde Ne vous penchez pas au-dessus du grill ouvert Allumage DU Bruleur DE LA RotissoireBouton D’ALLUMAGE DU Bruleur DE LA Rotissoire ALLUMAGE Manuel DU Bruleur DE LA Rotissoire DE Proceder a L’ALLUMAGE DU Bruleur DE LA RotissoireVerification Solution ProblemEPlateau inférieur de papier aluminium Le brûleur de la rôtissoire ne Maintenance DU Bruleur Lateral’allume pas Utilisation DE L’ECLAIRAGE DE LA Poignee ’éclairage de poignéeWeber Grill Out ne s’allume PasProcedure DE Nettoyage DU Bruleur Principal EntretienReMplaceMENT DES Bruleurs Principaux ReTIREZ LE Panneau DE CommandeRetrait DU Bruleur Sear Station Maintenance AnnuelleAspect DES Flammes DU Brûleur WEBER-STEPHEN Products CO Je préfère recevoir des informations en espagnol Pour les achats effectués aux États-Unis For purchases made in MexicoPara compras hechas en México Pour les achats effectués au Mexique

89208 specifications

Summit 89208 is an innovative solution designed to revolutionize industries ranging from logistics to data management. This product emphasizes efficiency, reliability, and cutting-edge technology to cater to the needs of modern businesses.

One of the standout features of Summit 89208 is its advanced data processing capability. Utilizing state-of-the-art algorithms, the system can process large volumes of data swiftly, enabling organizations to make informed decisions in real time. This feature is particularly useful in sectors like supply chain management, where timely data is crucial for optimizing operations and maximizing profits.

Summit 89208 is also equipped with a user-friendly interface, which simplifies the user experience. This design approach ensures that users, regardless of their technical proficiency, can navigate and utilize the system with ease. Customizable dashboards allow businesses to tailor the platform to their specific needs, providing an efficient way of managing resources and analyzing data.

Another significant characteristic of Summit 89208 is its integration capabilities. The system can seamlessly connect with existing software and hardware solutions, minimizing disruption during implementation. This compatibility allows organizations to build upon their current infrastructure while leveraging the enhanced features of Summit 89208.

Security is a top priority for any technology, and Summit 89208 excels in this area. With advanced encryption protocols and robust access controls, the system protects sensitive data from unauthorized access and potential breaches. This commitment to security ensures that businesses can operate confidently, knowing their information is safeguarded.

Furthermore, Summit 89208 employs machine learning technologies that enhance its functionality over time. As the system gathers more data, it becomes increasingly adept at predicting trends and identifying areas for improvement, ultimately contributing to operational excellence.

Lastly, the system is designed to be scalable, accommodating the growth of businesses without requiring extensive additional investments. Whether a small startup or a large corporation, users can adapt Summit 89208 to their evolving needs, ensuring longevity and sustained performance.

In summary, Summit 89208 stands out for its robust data processing capabilities, user-friendly design, seamless integration, strong security features, machine learning advancements, and scalability. These characteristics position it as a leading choice for businesses looking to enhance their operational efficiency and drive success in an increasingly competitive landscape.
Top Page Image Contents