Summit 89208 manual Side Burner Troubleshooting, Problem Check Cure, Aluminum foil

Page 24

24

Troubleshooting

 

 

 

 

Problem

Check

Cure

 

 

 

Burners burn with a yellow or orange flame, in

Inspect Spider/Insect Screens for possible obstructions.

Clean Spider/Insect Screens. (See Section “Annual

conjunction with the smell of gas (This is normal for

(Blockage of holes.)

Maintenance”)

the burner lighting tube).

 

 

 

 

 

Symptoms:

Is fuel hose bent or kinked?

Straighten fuel hose.

Burner does not light, or flame is low in “HI”

 

 

position.

 

 

 

 

 

 

Does Burner light with a match?

If you can light Burner with a match, then check the

 

 

Crossover® ignition system.

 

 

 

 

Did you use the snap igniter several times until the main

Make sure to hold the control knob in for two seconds

 

burner lit (See Lighting Instructions)?

after snapping the igniter and seeing the orange flame

 

 

from the burner lighting tube.

 

 

 

 

Does the igniter work (Do you see a spark when you

Try manually lighting the burner (refer to “Main Burner

 

repeatedly use the snap igniter?

Manual Lighting”). Call customer service.

 

 

 

Experiencing flare-ups:

Are you preheating barbecue in the prescribed manner?

All burners on HI for 10 to 15 minutes for preheating.

 

 

 

 

Are the cooking grates and Flavorizer® bars heavily

Clean thoroughly. (See Section “Cleaning”)

 

coated with burned-on grease?

 

 

 

 

m CAUTION: Do not line the bottom tray with

Is the bottom tray “dirty” and not allowing grease to flow

Clean bottom tray.

into catch pan?

 

aluminum foil.

 

 

 

 

 

 

Burner flame pattern is erratic. Flame is low when

Are burners clean?

Clean burners. (See Section “Maintenance”.)

burner is on “HI”. Flames do not run the whole

 

 

length of the burner tube.

 

 

 

 

 

Inside of lid appears to be “peeling.” (Resembles

The lid is porcelain enamel or stainless steel, not paint. It

Clean thoroughly. (See Section “Cleaning”.)

paint peeling.)

cannot “peel”. What you are seeing is baked on grease

 

 

that has turned to carbon and is flaking off.

 

 

THIS IS NOT A DEFECT.

 

 

 

 

Cabinet doors are not aligned.

Check the adjustment pin on the bottom of each door.

Loosen adjustment nut/s. Slide door/s until aligned.

 

 

Tighten nut.

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

Side Burner Troubleshooting

Problem

Check

Cure

 

 

 

Side Burner does not light.

Is gas supply off?

Turn supply on.

 

 

 

Flame is low in “HI” position

Is the fuel hose bent or kinked?

Straighten hose.

 

 

 

Push button ignition does not work.

Does burner light with a match?

If match lights burner, check igniter (see below).

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

www.weber.com®

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Gas Grill 2warnings Liquid Propane GAS Units onlyPara compras hechas en México Exploded View S 670TM Exploded View List S 670TM GAS Supply Testing General InstructionsInstall Gas Supply General Specifications for PipingGas Instructions GAS Line PipingWhat is Natural GAS? Portable InstallationType of GAS Leak Check PreparationCheck the flexible hose to manifold connection Reinstall control panel CheckMain gas line to manifold connection Lighting Operating Instructions To ExtinguishArrêté Apagado OFF START/HI MEDOFF START/HI MED Direct cookingIndirect cooking Grilling Tips & Helpful Hints Bright sunny dayTo Use the Sear Station Sear StationSear Station Burner Lighting Adjacent Main Burner Snap IgnitionTo ignite the Sear Station burner continue with Step To ExtinguishUsing the Smoker Cleaning the SmokerTo USE the Smoker Apagado EN Marche EncendidoLighting the Smoker Burner Manually Lighting the Smoker Burner Operating Cooking Rotisserie Motor StorageLighting the Rotisserie Burner Rotisserie Burner Snap IgnitionManually Lighting the Rotisserie Burner Lighting Rotisserie BurnerTroubleshooting Side Burner TroubleshootingProblem Check Cure Aluminum foilSide Burner Maintenance Rotisserie TroubleshootingSide Burner maintenance OFF position Rotisserie burner does not lightSear Burner Troubleshooting Operating the Handle LightWeber Grill Out Handle Light does not lightMaintenance Weber SPIDER/INSECT ScreensTurn off the gas supply Replace Main Burners Annual Maintenance Inspection and Cleaning of the SPIDER/INSECT ScreensRemoving the sear Station Burner Burner Flame PatternBarbacoa de gas Advertencias PeligroÚnicamente Unidades DE GAS Propano Licuado Instrucciones generales AlmacenajeMétodos de asar a la parrilla Para la instalación en CanadáInstrucciones sobre el gas Instale el suministro de gasEspecificaciones generales de la tubería Instalación de la tubería de gasTipo DE GAS ¿QUÉ ES EL GAS NATURAL?Instalación Transportable Preparativos Para LA Búsqueda DE FugasRevise la manguera flexible a la conexión del múltiple Verifique Vuelva a instalar el panel de controlLa barbacoa ilustrada Instrucciones de operación Advertencia No se incline sobre la barbacoa abiertaEncendido Manual DEL Quemador Principal Apagado OFFMétodos para asar OFF Start MEDCocción directa Cocción indirectaConsejos prácticos para asar Para usar la estación para dorar Sear Station Encendido DE Acción Rápida DEL Quemador Principal Adyacente Para ApagarEncendido Manual DEL Quemador DE LA Estación Para Dorar Sear Station Peligro Para Usar EL AhumadorLa barbacoa Encendido manual del quemador del ahumador Uso del asador giratorioMedidas preventivas importantes Advertencias Este asador giratorio debe usarse solamente al aire libreInstrucciones de operación Almacenaje DEL Motor DEL Asador Giratorio Encendido del quemador del asador giratorio Encendido rápido del quemador del asador giratorioEncendido Manual DEL Quemador DEL Asador GiratorioAtención Léalo Antes DE Encender EL Quemador DEL AsadorResolución de problemas Resolución de problemas con el quemador lateralProblema Revisar Remedio Resolución de problemas con el asador giratorio Mantenimiento del quemador lateralEl quemador del asador giratorio no Se enciendeResolución de problemas del quemador para dorar Operación de la luz del asaAntes de intentarlo de nuevo La lámpara del asa Weber Grill OutMantenimiento Reemplace los quemadores principales Cómo Sacar EL Quemador DE LA Estación Para Dorar Sear StationMantenimiento Anual Patrón DE LA Llama DEL QuemadorGrill a GAZ Mises EN Garde Appareils a GAZ Propane UniquementUtilisation Test DE L’ALIMENTATION EN GAZNettoyage InstallATION DE L’ALIMENTATION EN GAZ Spécifications générales relatives à la canalisationTest des raccords Conduite de gazInstructions Relatives AU GAZ Instructions Relatives AU GAZ ReMISE EN Place DU Panneau DE Commande VérifiezUtilisation DU Bouton D’ALLUMAGE Ouvrez toujours le couvercle avant d’allumer les brûleursAllumage Bouton D’ALLUMAGE DU Bruleur PrincipalInstructions Pour L’UTILISATION Pour EteindreAllumage Manuel DU Bruleur Principal Cuisson Directe Cuisson IndirectePréchauffage Cuisson CouverteAstuces & Conseils Utiles Pour LES Grillades Allumage DU Bruleur LateralAllumage Manuel DU Bruleur Lateral Brûleur latéral par une journée claire et ensoleilléeUtilisation DU Bruleur Sear Station Pour Utiliser LE Brûleur Sear StationAllumage DU Bruleur Sear Station Allumage Automatique DES Bruleurs Principaux AdjacentsPour allumer le brûleur Sear Station continuez avec l’Etape Allumage Manuel DU Bruleur Sear Station Utilisation DU FumoirPour Utiliser LE Fumoir Nettoyage DU FumoirAllumage DU Bruleur DU Fumoir Allumage DU Bruleur DU Fumoir Avec LE BoutonPrecautions DE Securite ImportantES Mises EN Garde ALLUMAGE Manuel DU Bruleur DU FumoirUtilisation DE LA Rotissoire Ouvrez le couvercleUtilisation Cuisson Stockage DU Moteur DE LA RotissoireAllumage DU Bruleur DE LA Rotissoire Mise EN Garde Ne vous penchez pas au-dessus du grill ouvertBouton D’ALLUMAGE DU Bruleur DE LA Rotissoire ALLUMAGE Manuel DU Bruleur DE LA Rotissoire DE Proceder a L’ALLUMAGE DU Bruleur DE LA RotissoireProblemE Verification SolutionPlateau inférieur de papier aluminium Maintenance DU Bruleur Lateral Le brûleur de la rôtissoire ne’allume pas Utilisation DE L’ECLAIRAGE DE LA Poignee ’éclairage de poignéeWeber Grill Out ne s’allume PasProcedure DE Nettoyage DU Bruleur Principal EntretienReMplaceMENT DES Bruleurs Principaux ReTIREZ LE Panneau DE CommandeMaintenance Annuelle Retrait DU Bruleur Sear StationAspect DES Flammes DU Brûleur WEBER-STEPHEN Products CO Je préfère recevoir des informations en espagnol Pour les achats effectués aux États-Unis For purchases made in MexicoPara compras hechas en México Pour les achats effectués au Mexique

89208 specifications

Summit 89208 is an innovative solution designed to revolutionize industries ranging from logistics to data management. This product emphasizes efficiency, reliability, and cutting-edge technology to cater to the needs of modern businesses.

One of the standout features of Summit 89208 is its advanced data processing capability. Utilizing state-of-the-art algorithms, the system can process large volumes of data swiftly, enabling organizations to make informed decisions in real time. This feature is particularly useful in sectors like supply chain management, where timely data is crucial for optimizing operations and maximizing profits.

Summit 89208 is also equipped with a user-friendly interface, which simplifies the user experience. This design approach ensures that users, regardless of their technical proficiency, can navigate and utilize the system with ease. Customizable dashboards allow businesses to tailor the platform to their specific needs, providing an efficient way of managing resources and analyzing data.

Another significant characteristic of Summit 89208 is its integration capabilities. The system can seamlessly connect with existing software and hardware solutions, minimizing disruption during implementation. This compatibility allows organizations to build upon their current infrastructure while leveraging the enhanced features of Summit 89208.

Security is a top priority for any technology, and Summit 89208 excels in this area. With advanced encryption protocols and robust access controls, the system protects sensitive data from unauthorized access and potential breaches. This commitment to security ensures that businesses can operate confidently, knowing their information is safeguarded.

Furthermore, Summit 89208 employs machine learning technologies that enhance its functionality over time. As the system gathers more data, it becomes increasingly adept at predicting trends and identifying areas for improvement, ultimately contributing to operational excellence.

Lastly, the system is designed to be scalable, accommodating the growth of businesses without requiring extensive additional investments. Whether a small startup or a large corporation, users can adapt Summit 89208 to their evolving needs, ensuring longevity and sustained performance.

In summary, Summit 89208 stands out for its robust data processing capabilities, user-friendly design, seamless integration, strong security features, machine learning advancements, and scalability. These characteristics position it as a leading choice for businesses looking to enhance their operational efficiency and drive success in an increasingly competitive landscape.
Top Page Image Contents