Summit 89208 Sear Burner Troubleshooting, Operating the Handle Light, Weber Grill Out Handle

Page 26

26

Sear Burner Troubleshooting

 

 

 

Problem

Check

Cure

 

 

 

Burners burn with a yellow or orange

Inspect Spider/Insect Screens for possible

Clean Spider/Insect Screens. (See Section “Annual Maintenance”)

flame, in conjunction with the smell

obstructions. (Blockage of holes.)

 

of gas (This is normal for the burner

 

 

lighting tube).

 

 

Sear Station burner does not light.

Did you ignite the two adjacent main burners

Verify adjacent main burner ignition by visual inspection of a flame.

 

(See Sear Station burner lighting instructions

m WARNING: If ignition does not occur in 5 seconds, turn burner control

 

for safe lighting procedure)

 

OFF, wait 5 minutes to let the gas clear before you try again

 

 

 

Does Burner light with a match?

If you can light Burner with a match, then check the Crossover® Channel on the sear

 

 

burner. (See Maintenance for burner removal and cleaning procedure.)

 

 

 

 

Does the igniter work (Do you see a spark

Try manually lighting the burner (refer to “Lighting the Rotisserie Burner”). Call

 

when you repeatedly use the snap igniter?

customer service.

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

Operating the Handle Light

The Weber Grill Out™ Handle Light has a built-in “Tilt Sensor.” With the power button (a)

a

activated, the light will come on when the grill lid is open. The light will turn off when the lid

 

is closed. For daytime use, deactivate the sensor by pressing power button (a).

 

handle light Troubleshooting

Problem

Check

Cure

 

 

 

Weber Grill Out™ Handle

Are the batteries old?

Replace batteries.

Light does not light.

 

 

Are the batteries installed correctly?

See assembly illustration.

 

 

 

 

 

Is the lid in the up position with the power button ON?

Light will activate when lid is open.

 

 

 

 

Is the Weber Grill Out™ Handle Light activated?

Press the power button.

 

 

 

 

Is the Weber Grill Out™ Handle Light positioned correctly on the handle?

Adjust position (See assembly illustration).

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

www.weber.com®

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Gas Grill 2warnings Liquid Propane GAS Units onlyPara compras hechas en México Exploded View S 670TM Exploded View List S 670TM GAS Supply Testing General InstructionsGas Instructions Install Gas SupplyGeneral Specifications for Piping GAS Line PipingType of GAS What is Natural GAS?Portable Installation Leak Check PreparationCheck the flexible hose to manifold connection Main gas line to manifold connection Reinstall control panelCheck Lighting Arrêté Operating InstructionsTo Extinguish Apagado OFF START/HI MEDIndirect cooking OFF START/HI MEDDirect cooking Grilling Tips & Helpful Hints Bright sunny dayTo Use the Sear Station Sear StationTo ignite the Sear Station burner continue with Step Sear Station Burner LightingAdjacent Main Burner Snap Ignition To ExtinguishTo USE the Smoker Using the SmokerCleaning the Smoker Apagado EN Marche EncendidoLighting the Smoker Burner Manually Lighting the Smoker Burner Operating Cooking Rotisserie Motor StorageLighting the Rotisserie Burner Rotisserie Burner Snap IgnitionManually Lighting the Rotisserie Burner Lighting Rotisserie BurnerProblem Check Cure TroubleshootingSide Burner Troubleshooting Aluminum foilSide Burner maintenance OFF position Side Burner MaintenanceRotisserie Troubleshooting Rotisserie burner does not lightWeber Grill Out Handle Sear Burner TroubleshootingOperating the Handle Light Light does not lightTurn off the gas supply MaintenanceWeber SPIDER/INSECT Screens Replace Main Burners Removing the sear Station Burner Annual MaintenanceInspection and Cleaning of the SPIDER/INSECT Screens Burner Flame PatternBarbacoa de gas Únicamente Unidades DE GAS Propano Licuado AdvertenciasPeligro Métodos de asar a la parrilla Instrucciones generalesAlmacenaje Para la instalación en CanadáEspecificaciones generales de la tubería Instrucciones sobre el gasInstale el suministro de gas Instalación de la tubería de gasInstalación Transportable Tipo DE GAS¿QUÉ ES EL GAS NATURAL? Preparativos Para LA Búsqueda DE FugasRevise la manguera flexible a la conexión del múltiple Verifique Vuelva a instalar el panel de controlLa barbacoa ilustrada Encendido Manual DEL Quemador Principal Instrucciones de operaciónAdvertencia No se incline sobre la barbacoa abierta Apagado OFFCocción directa Métodos para asarOFF Start MED Cocción indirectaConsejos prácticos para asar Para usar la estación para dorar Sear Station Encendido DE Acción Rápida DEL Quemador Principal Adyacente Para Apagar Peligro Encendido Manual DEL Quemador DE LA EstaciónPara Dorar Sear Station Para Usar EL AhumadorLa barbacoa Medidas preventivas importantes Advertencias Encendido manual del quemador del ahumadorUso del asador giratorio Este asador giratorio debe usarse solamente al aire libreInstrucciones de operación Almacenaje DEL Motor DEL Asador Giratorio Encendido del quemador del asador giratorio Encendido rápido del quemador del asador giratorioAtención Léalo Antes DE Encendido Manual DEL Quemador DEL AsadorGiratorio Encender EL Quemador DEL AsadorProblema Revisar Remedio Resolución de problemasResolución de problemas con el quemador lateral El quemador del asador giratorio no Resolución de problemas con el asador giratorioMantenimiento del quemador lateral Se enciendeAntes de intentarlo de nuevo Resolución de problemas del quemador para dorarOperación de la luz del asa La lámpara del asa Weber Grill OutMantenimiento Reemplace los quemadores principales Mantenimiento Anual Cómo Sacar EL Quemador DE LA Estación Para DorarSear Station Patrón DE LA Llama DEL QuemadorGrill a GAZ Mises EN Garde Appareils a GAZ Propane UniquementNettoyage UtilisationTest DE L’ALIMENTATION EN GAZ Test des raccords InstallATION DE L’ALIMENTATION EN GAZSpécifications générales relatives à la canalisation Conduite de gazInstructions Relatives AU GAZ Instructions Relatives AU GAZ ReMISE EN Place DU Panneau DE Commande VérifiezAllumage Utilisation DU Bouton D’ALLUMAGEOuvrez toujours le couvercle avant d’allumer les brûleurs Bouton D’ALLUMAGE DU Bruleur PrincipalAllumage Manuel DU Bruleur Principal Instructions Pour L’UTILISATIONPour Eteindre Préchauffage Cuisson DirecteCuisson Indirecte Cuisson CouverteAstuces & Conseils Utiles Pour LES Grillades Allumage DU Bruleur LateralUtilisation DU Bruleur Sear Station Allumage Manuel DU Bruleur LateralBrûleur latéral par une journée claire et ensoleillée Pour Utiliser LE Brûleur Sear StationPour allumer le brûleur Sear Station continuez avec l’Etape Allumage DU Bruleur Sear StationAllumage Automatique DES Bruleurs Principaux Adjacents Pour Utiliser LE Fumoir Allumage Manuel DU Bruleur Sear StationUtilisation DU Fumoir Nettoyage DU FumoirAllumage DU Bruleur DU Fumoir Allumage DU Bruleur DU Fumoir Avec LE BoutonUtilisation DE LA Rotissoire Precautions DE Securite ImportantES Mises EN GardeALLUMAGE Manuel DU Bruleur DU Fumoir Ouvrez le couvercleUtilisation Cuisson Stockage DU Moteur DE LA RotissoireBouton D’ALLUMAGE DU Bruleur DE LA Rotissoire Allumage DU Bruleur DE LA RotissoireMise EN Garde Ne vous penchez pas au-dessus du grill ouvert ALLUMAGE Manuel DU Bruleur DE LA Rotissoire DE Proceder a L’ALLUMAGE DU Bruleur DE LA RotissoirePlateau inférieur de papier aluminium ProblemEVerification Solution ’allume pas Maintenance DU Bruleur LateralLe brûleur de la rôtissoire ne Weber Grill Out ne s’allume Utilisation DE L’ECLAIRAGE DE LA Poignee’éclairage de poignée PasProcedure DE Nettoyage DU Bruleur Principal EntretienReMplaceMENT DES Bruleurs Principaux ReTIREZ LE Panneau DE CommandeAspect DES Flammes DU Brûleur Maintenance AnnuelleRetrait DU Bruleur Sear Station WEBER-STEPHEN Products CO Je préfère recevoir des informations en espagnol Para compras hechas en México Pour les achats effectués aux États-UnisFor purchases made in Mexico Pour les achats effectués au Mexique

89208 specifications

Summit 89208 is an innovative solution designed to revolutionize industries ranging from logistics to data management. This product emphasizes efficiency, reliability, and cutting-edge technology to cater to the needs of modern businesses.

One of the standout features of Summit 89208 is its advanced data processing capability. Utilizing state-of-the-art algorithms, the system can process large volumes of data swiftly, enabling organizations to make informed decisions in real time. This feature is particularly useful in sectors like supply chain management, where timely data is crucial for optimizing operations and maximizing profits.

Summit 89208 is also equipped with a user-friendly interface, which simplifies the user experience. This design approach ensures that users, regardless of their technical proficiency, can navigate and utilize the system with ease. Customizable dashboards allow businesses to tailor the platform to their specific needs, providing an efficient way of managing resources and analyzing data.

Another significant characteristic of Summit 89208 is its integration capabilities. The system can seamlessly connect with existing software and hardware solutions, minimizing disruption during implementation. This compatibility allows organizations to build upon their current infrastructure while leveraging the enhanced features of Summit 89208.

Security is a top priority for any technology, and Summit 89208 excels in this area. With advanced encryption protocols and robust access controls, the system protects sensitive data from unauthorized access and potential breaches. This commitment to security ensures that businesses can operate confidently, knowing their information is safeguarded.

Furthermore, Summit 89208 employs machine learning technologies that enhance its functionality over time. As the system gathers more data, it becomes increasingly adept at predicting trends and identifying areas for improvement, ultimately contributing to operational excellence.

Lastly, the system is designed to be scalable, accommodating the growth of businesses without requiring extensive additional investments. Whether a small startup or a large corporation, users can adapt Summit 89208 to their evolving needs, ensuring longevity and sustained performance.

In summary, Summit 89208 stands out for its robust data processing capabilities, user-friendly design, seamless integration, strong security features, machine learning advancements, and scalability. These characteristics position it as a leading choice for businesses looking to enhance their operational efficiency and drive success in an increasingly competitive landscape.
Top Page Image Contents