MAINTENANCE
ANNUAL MAINTENANCE
Inspection And Cleaning Of The Spider/Insect Screen
If there is dust or dirt on the Spider/Insect screen, remove the burner to clean the screen. Refer to “BURNER TUBE CLEANING OR REPLACEMENT”.
Brush the Spider/Insect screen, lightly, with a soft bristle brush (i.e. an old toothbrush).
m CAUTION: Do not clean the Spider/Insect screen with hard or sharp tools. Do not dislodge the Spider/Insect screen or enlarge the screen openings.
Lightly tap the burner to get debris and dirt out of the burner tube. Once the Spider/ Insect screen and burner is clean, replace the burner.
If the Spider/Insect screen becomes damaged or cannot be cleaned, contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
Main Burner Flame Pattern
The Weber® gas barbecue burner has been factory set for the correct air and gas mixture. The correct flame pattern is shown.
A) Burner tube (1)
B) Tips occasionally flicker yellow (2) C) Light blue (3)
D) Dark blue (4)
If the flames do not appear to be uniform throughout the burner tube, follow the burner | 1 |
cleaning procedures. ◆
2
3
4
mATTENTION: This product has been safety tested and is only certified for use in a specific country. Refer to country designation located on outer carton.
These parts may be gas carrying or gas burning components. Please contact
mWARNING: Do not attempt to make any repair to gas carrying, gas burning, igniter components or structural components without contacting
36