Invacare 9000 Series, 9000 XT, 9000 XDT Chart 18 Seat-to-Floor Height of 17½ inches and 0 Angle

Page 42

SECTION 5—SEAT TO FLOOR

Chart 18 - Seat-to-Floor Height of 17½ inches and 0° Angle

	REAR WHEEL POSITION			ANTI-TIP	FRONT CASTER
	OFFSET AXLE OPTION STANDARD			PART/MODEL	MOUNTING	ADJC CAM
	OFFSET AXLE OPTION STANDARD			NUMBERS	MOUNTING	ADJC CAM
	FORWARD*	REARWARD		NUMBERS	POSITION	POSITION
					POSITION	POSITION

	Hole 1	Hole 1	N/A for this	N/A On-Chair		Front
	Hole 1	Hole 1	frame style			Front
			frame style
				1058836 Off-Chair
	Hole 3	Hole 3
						Notch

*NOTE: This offset axle plate position requires the caster headtube to be leading to provide adequate tire clearance between the rear tire and the front caster. Refer to Converting from Trailing to Leading or Leading to Trailing Casters on page 27.

Chart 19 - Seat-to-Floor Height of 17½ inches and 3° Angle

REAR WHEEL POSITION			ANTI-TIP	FRONT CASTER
			PART/MODEL
OFFSET AXLE OPTION		STANDARD	PART/MODEL	MOUNTING			ADJC CAM
			NUMBERS	POSITION			POSITION
FORWARD*	REARWARD		NUMBERS



Hole 4	Hole 4	N/A for this	N/A On-Chair				Front
		N/A for this	N/A On-Chair
		frame style
		frame style

1058836 Off-Chair

Hole 2

Hole 2

Notch

*NOTE: This offset axle plate position requires the caster headtube to be leading to provide adequate tire clearance between the rear tire and the front caster. Refer to Converting from Trailing to Leading or Leading to Trailing Casters on page 27.

9000 Series

42

Part No. 1076155

Image 42

Contents Series Reference Documents Table of Contents Rear Wheels Limited Warranty Special Notes Wheelchair TIE-DOWN Restraints and Seat RestraintsLabel Location Important NoticeTypical Product Parameters 9000 SL9000 XT Typical Product Parameters XT Recliner 9000 XDT General Guidelines Stability All ModelsAnti-Tippers Operating InformationStability Recliner Models Only Weight Training Weight LimitationTire Pressure Safety INSPECTION/TROUBLESHOOTING ChecklistMaintenance Safety Precautions TroubleshootingMaintenance Suggested Maintenance ProceduresSafety INSPECTION/TROUBLESHOOTING Adjusting Back Angle Seat and BackAdjusting Back Height SL without Adjustable Back Angle OptionAdjusting Seat Width SL with Adjustable Back Angle Option and 9000 XT/XDTPivot Link Adjusting Seat Width Adjusting Seat Depth 9000XT ModelXDT and 9000 SL Mounting ScrewsSeat and Back Front Caster Mounting Adjustments Front CastersWheelchair Frame Repositioning/Replacing Cam Seat to Floor Changing Seat-to-Floor Height/Seat-to-Floor AngleAngle ‐ a 3 seat‐to‐floor angle is the only available angle Super Low Frame Style Adult/Tall Frame StyleAdult/Hemi Frame Styles AngleForward Rearward Numbers Position Forward Rearward Position Forward Rearward Numbers Chart 7 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 9 Seat-to-Floor Height of 17½ inches and 0 Angle Rear Wheel Position ANTI-TIP Front Caster Offset Axle Option Forward Rearward Chart 15 Seat-to-Floor Height of 19½ inches and 6 Angle Rear Wheel Position ANTI-TIP Front Caster Chart 18 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 20 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 21 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 24 Seat-to-Floor Height of 16½ inches and 0 Angle Chart 27 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 29 Seat-to-Floor Height of 18½ inches and 6 Angle Chart 31 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 32 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 35 Seat-to-Floor Height of 16½ inches and 3 Angle Chart 38 Seat-to-Floor Height of 15½ inches and 3 Angle Removing/Installing Rear Wheels Rear WheelsQuick-Release Axles Permanent Axles Detent PinModels with Offset Axle Option Rear Wheels Spacers Adjusting Quick-Release Axle Adjusting Wheelbase LengthRecliner Replacing Release HandleAdjusting Cable Assembly Tension Replacing Release HandleReplacing Cable Assembly Adjusting Cable Assembly TensionDisconnecting/Connecting Lower Cable Assembly DisconnectingConnecting Recliner Disconnecting/Connecting Lower Cable Assembly Replacing Threaded Sector Replacing Threaded SectorReplacing Locking Rod Replacing Back TubeRecliner Removing/Installing Spring Lift Mechanism RemovingInstalling Removing/Installing Spring Lift MechanismReplacing Recliner Tube Replacing Recliner Tube Adjusting Seat Width Pivot Link 10 Adjusting Seat Width 11 Adjusting Seat Depth With Patient Operated Wheel Locks Using/Adjusting Wheel LocksUsing Attendant Operated Wheel Locks With Attendant Operated Wheel LocksAdjusting Attendant Operated Wheel Locks 14 Using Attendant Operated Wheel Locks15 Adjusting Attendant Operated Wheel Locks Changing Seat-to-Floor HeightInstalling Anti-Tippers 16 Changing Seat-to-Floor HeightRecliner XT Recliner Installing/Adjusting Anti-tippers Installing Anti-TippersANTI-TIPPERS/WHEEL Locks Adjusting Anti-Tippers Installing Anti-TippersUsing/Adjusting Disk Wheel Locks Using Patient Operated Disk Wheel LocksAdjusting Patient-Operated Wheel Locks Using Patient Operated Disk Wheel LocksAdjusting Patient-Operated Wheel Locks Installing Wheel Lock Shoe Extensions Installing Wheel Lock Shoe ExtensionsANTI-TIPPERS/WHEEL Locks Limited Warranty Made in Mexico

Related manuals

Manual 30 pages 6.48 Kb

Manual 60 pages 56.17 Kb