Invacare 9000 SL, 9000 XT, 9000XT Recliner, 9000 Series Adjusting Patient-Operated Wheel Locks

Page 84

SECTION 8—ANTI-TIPPERS/WHEEL LOCKS

7.Repeat STEPS 1‐6 until the wheel lock shoe embeds the tire 1/8‐inch (3/16‐inch for pneumatic tires) and holds the occupied wheelchair in place when pushed.

8.If the measurement of 1/8‐inch (3/16‐inch for pneumatic tires) can not be achieved, Perform one (1) of the following:

•Bolt‐on wheel locks ‐ Remove the bolt and locknut that secure the wheel lock to the wheelchair frame and mount the wheel lock in the remaining mounting position.

•Clamp‐on Wheel locks ‐ Proceed to STEP 9.

9.If wheel lock is unable to properly engage the wheel it may be necessary to install wheel lock shoe extensions. Refer to Installing Wheel Lock Shoe Extensions on page 85.

10.Repeat STEPS 1‐9 for the opposite wheel lock.

11.Engage both wheel locks and ensure the occupied wheelchair is held in place when pushed.

Bolt-On Wheel Locks

 

 

1/8-inch (3/16-inch

 

 

pneumatic tires)

 

 

Wheel Lock

 

 

Shoe

 

 

Tire

Mounting

Bolt and

 

Wheel Positions

Locknut

Wheel Lock

Lock

 

 

Handle

 

 

 

 

Wheel

 

 

Lock

 

Rear

Shoe

 

 

 

Wheel

 

Clamp-On Wheel Locks

Socket Screws

Wheel

Lock

Clamp

Wheel Lock

Wheel

Lock

Shoe

Rear Wheel

9000 Series

84

Part No. 1076155

Page 83 Page 85
Image 84
Page 83 Page 85
Contents Series Reference Documents Table of Contents Rear Wheels Limited Warranty Special Notes Wheelchair TIE-DOWN Restraints and Seat RestraintsLabel Location Important NoticeTypical Product Parameters 9000 SL9000 XT Typical Product Parameters XT Recliner 9000 XDT General Guidelines Stability All ModelsAnti-Tippers Operating InformationStability Recliner Models Only Weight Training Weight LimitationTire Pressure Safety INSPECTION/TROUBLESHOOTING ChecklistTroubleshooting MaintenanceMaintenance Safety Precautions Suggested Maintenance ProceduresSafety INSPECTION/TROUBLESHOOTING Adjusting Back Angle Seat and BackAdjusting Back Height SL without Adjustable Back Angle OptionAdjusting Seat Width SL with Adjustable Back Angle Option and 9000 XT/XDTPivot Link Adjusting Seat Width Adjusting Seat Depth 9000XT ModelXDT and 9000 SL Mounting ScrewsSeat and Back Front Caster Mounting Adjustments Front CastersWheelchair Frame Repositioning/Replacing Cam Seat to Floor Changing Seat-to-Floor Height/Seat-to-Floor AngleAngle ‐ a 3 seat‐to‐floor angle is the only available angle Super Low Frame Style Adult/Tall Frame StyleAdult/Hemi Frame Styles AngleForward Rearward Numbers Position Forward Rearward Position Forward Rearward Numbers Chart 7 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 9 Seat-to-Floor Height of 17½ inches and 0 Angle Rear Wheel Position ANTI-TIP Front Caster Offset Axle Option Forward Rearward Chart 15 Seat-to-Floor Height of 19½ inches and 6 Angle Rear Wheel Position ANTI-TIP Front Caster Chart 18 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 20 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 21 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 24 Seat-to-Floor Height of 16½ inches and 0 Angle Chart 27 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 29 Seat-to-Floor Height of 18½ inches and 6 Angle Chart 31 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 32 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 35 Seat-to-Floor Height of 16½ inches and 3 Angle Chart 38 Seat-to-Floor Height of 15½ inches and 3 Angle Removing/Installing Rear Wheels Rear WheelsQuick-Release Axles Permanent Axles Detent PinModels with Offset Axle Option Rear Wheels Spacers Adjusting Quick-Release Axle Adjusting Wheelbase LengthRecliner Replacing Release HandleAdjusting Cable Assembly Tension Replacing Release HandleReplacing Cable Assembly Adjusting Cable Assembly TensionDisconnecting/Connecting Lower Cable Assembly DisconnectingConnecting Recliner Disconnecting/Connecting Lower Cable Assembly Replacing Threaded Sector Replacing Threaded SectorReplacing Locking Rod Replacing Back TubeRecliner Removing/Installing Spring Lift Mechanism RemovingInstalling Removing/Installing Spring Lift MechanismReplacing Recliner Tube Replacing Recliner Tube Adjusting Seat Width Pivot Link 10 Adjusting Seat Width 11 Adjusting Seat Depth Using/Adjusting Wheel Locks Using Attendant Operated Wheel LocksWith Patient Operated Wheel Locks With Attendant Operated Wheel LocksAdjusting Attendant Operated Wheel Locks 14 Using Attendant Operated Wheel Locks15 Adjusting Attendant Operated Wheel Locks Changing Seat-to-Floor HeightInstalling Anti-Tippers 16 Changing Seat-to-Floor HeightRecliner XT Recliner Installing/Adjusting Anti-tippers Installing Anti-TippersANTI-TIPPERS/WHEEL Locks Adjusting Anti-Tippers Installing Anti-TippersUsing/Adjusting Disk Wheel Locks Using Patient Operated Disk Wheel LocksAdjusting Patient-Operated Wheel Locks Using Patient Operated Disk Wheel LocksAdjusting Patient-Operated Wheel Locks Installing Wheel Lock Shoe Extensions Installing Wheel Lock Shoe ExtensionsANTI-TIPPERS/WHEEL Locks Limited Warranty Made in Mexico
Related manuals
Manual 30 pages 6.48 Kb Manual 60 pages 56.17 Kb
Top Page Image Contents