Invacare 9000XT Recliner, 9000 XT, 9000 SL Chart 27 Seat-to-Floor Height of 17½ inches and 0 Angle

Page 46

SECTION 5—SEAT TO FLOOR

Chart 27 - Seat-to-Floor Height of 17½ inches and 0° Angle

REAR WHEEL POSITION			ANTI-TIP	FRONT CASTER
OFFSET AXLE OPTION		STANDARD	PART/MODEL	MOUNTING	ADJC CAM
FORWARD	REARWARD		NUMBERS	POSITION	POSITION
				POSITION	POSITION

Hole 4	Hole 4		N/A On-Chair		Front
Hole 4	Hole 4				Front
			1058752
			Off-Chair
Hole 3	Hole 3
Hole 3					Notch
					Notch

Chart 28 - Seat-to-Floor Height of 15½ inches and 3° Angle

REAR WHEEL POSITION			ANTI-TIP	FRONT CASTER
OFFSET AXLE OPTION		STANDARD	PART/MODEL	MOUNTING	ADJC CAM
FORWARD	REARWARD		NUMBERS	POSITION	POSITION
				POSITION	POSITION

Hole 4	Hole 4		N/A On-Chair		Front
	Hole 4				Front
			1058752
			Off-Chair
	Hole 5
Hole 5					Notch
					Notch

20-Inch Rear Wheels and 8-Inch Front Casters

WARNING

If changing the seat-to-floor angle to 6°, anti-tippers MUST be installed.

Refer to the following table to determine the obtainable seat‐to‐floor heights and seat‐to‐floor angles for 20‐inch rear wheels and 8‐inch front casters:

SEAT-TO-FLOOR	SEAT-TO-FLOOR	REFER TO
HEIGHT*	ANGLE

18½ inches	6°	Chart 29

17½ inches	3°	Chart 30

17½ inches	6°	Chart 31

9000 Series

46

Part No. 1076155

Image 46

Contents Series Reference Documents Table of Contents Rear Wheels Limited Warranty Special Notes Wheelchair TIE-DOWN Restraints and Seat RestraintsLabel Location Important NoticeTypical Product Parameters 9000 SL9000 XT Typical Product Parameters XT Recliner 9000 XDT General Guidelines Stability All ModelsOperating Information Anti-TippersStability Recliner Models Only Weight Limitation Weight TrainingTire Pressure Safety INSPECTION/TROUBLESHOOTING ChecklistMaintenance Safety Precautions TroubleshootingMaintenance Suggested Maintenance ProceduresSafety INSPECTION/TROUBLESHOOTING Adjusting Back Angle Seat and BackAdjusting Back Height SL without Adjustable Back Angle OptionAdjusting Seat Width SL with Adjustable Back Angle Option and 9000 XT/XDTPivot Link Adjusting Seat Width Adjusting Seat Depth 9000XT ModelXDT and 9000 SL Mounting ScrewsSeat and Back Front Caster Mounting Adjustments Front CastersWheelchair Frame Repositioning/Replacing Cam Seat to Floor Changing Seat-to-Floor Height/Seat-to-Floor AngleAngle ‐ a 3 seat‐to‐floor angle is the only available angle Super Low Frame Style Adult/Tall Frame StyleAdult/Hemi Frame Styles AngleForward Rearward Numbers Position Forward Rearward Position Forward Rearward Numbers Chart 7 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 9 Seat-to-Floor Height of 17½ inches and 0 Angle Rear Wheel Position ANTI-TIP Front Caster Offset Axle Option Forward Rearward Chart 15 Seat-to-Floor Height of 19½ inches and 6 Angle Rear Wheel Position ANTI-TIP Front Caster Chart 18 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 20 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 21 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 24 Seat-to-Floor Height of 16½ inches and 0 Angle Chart 27 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 29 Seat-to-Floor Height of 18½ inches and 6 Angle Chart 31 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 32 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 35 Seat-to-Floor Height of 16½ inches and 3 Angle Chart 38 Seat-to-Floor Height of 15½ inches and 3 Angle Rear Wheels Removing/Installing Rear WheelsQuick-Release Axles Permanent Axles Detent PinModels with Offset Axle Option Rear Wheels Spacers Adjusting Quick-Release Axle Adjusting Wheelbase LengthRecliner Replacing Release HandleAdjusting Cable Assembly Tension Replacing Release HandleReplacing Cable Assembly Adjusting Cable Assembly TensionDisconnecting Disconnecting/Connecting Lower Cable AssemblyConnecting Recliner Disconnecting/Connecting Lower Cable Assembly Replacing Threaded Sector Replacing Threaded SectorReplacing Locking Rod Replacing Back TubeRecliner Removing/Installing Spring Lift Mechanism RemovingInstalling Removing/Installing Spring Lift MechanismReplacing Recliner Tube Replacing Recliner Tube Adjusting Seat Width Pivot Link 10 Adjusting Seat Width 11 Adjusting Seat Depth With Patient Operated Wheel Locks Using/Adjusting Wheel LocksUsing Attendant Operated Wheel Locks With Attendant Operated Wheel LocksAdjusting Attendant Operated Wheel Locks 14 Using Attendant Operated Wheel Locks15 Adjusting Attendant Operated Wheel Locks Changing Seat-to-Floor HeightInstalling Anti-Tippers 16 Changing Seat-to-Floor HeightRecliner XT Recliner Installing Anti-Tippers Installing/Adjusting Anti-tippersANTI-TIPPERS/WHEEL Locks Adjusting Anti-Tippers Installing Anti-TippersUsing/Adjusting Disk Wheel Locks Using Patient Operated Disk Wheel LocksAdjusting Patient-Operated Wheel Locks Using Patient Operated Disk Wheel LocksAdjusting Patient-Operated Wheel Locks Installing Wheel Lock Shoe Extensions Installing Wheel Lock Shoe ExtensionsANTI-TIPPERS/WHEEL Locks Limited Warranty Made in Mexico

Related manuals

Manual 30 pages 6.48 Kb

Manual 60 pages 56.17 Kb