Invacare 9000 XDT, 9000 XT, 9000XT Recliner, 9000 Series, 9000 SL Forward Rearward Numbers Position

Page 33

SECTION 5—SEAT TO FLOOR

NOTE: Charts 1 to 8 apply to adult/hemi frame styles only. Refer to the charts for seat‐to‐floor height settings for adult/tall (Adult/Tall Frame Style on page 31) and super low frame styles (Super Low Frame Style on page 31) and Changing Seat‐to‐Floor Height on page 77 for recliner frame styles.

Chart 1 - Seat-to-Floor Height of 19½ inches and 3° Angle

REAR WHEEL POSITION

ANTI-TIP

FRONT CASTER

OFFSET AXLE OPTION

STANDARD

PART/MODEL

MOUNTING

ADJC CAM

FORWARD*

REARWARD

 

NUMBERS

POSITION

POSITION

 

 

 

 

 

 

Hole 1

Hole 1

 

1360 On-Chair

 

Front

 

 

 

 

 

 

1058836

 

 

 

 

 

Off-Chair

 

 

Hole 3

Hole 3

 

 

 

 

 

 

 

 

 

Notch

*NOTE: This offset axle plate position requires the caster headtube to be leading to provide adequate tire clearance between the rear tire and the front caster. Refer to Converting from Trailing to Leading or Leading to Trailing Casters on page 27.

Chart 2 - Seat-to-Floor Height of 19½ inches and 6° Angle

REAR WHEEL POSITION

ANTI-TIP

FRONT CASTER

OFFSET AXLE OPTION

STANDARD

PART/MODEL

MOUNTING

ADJC CAM

FORWARD*

REARWARD

 

NUMBERS

POSITION

POSITION

 

 

 

 

 

 

Hole 4

Hole 4

N/A for this

N/A On-Chair

 

Front

frame style

 

 

 

 

 

 

 

 

 

 

1113766

 

 

Hole 2

 

 

Off-Chair

 

 

 

 

 

 

 

 

Hole 2

 

 

 

 

 

 

 

 

 

Notch

*NOTE: This offset axle plate position requires the caster headtube to be leading to provide adequate tire clearance between the rear tire and the front caster. Refer to Converting from Trailing to Leading or Leading to Trailing Casters on page 27.

Part No. 1076155

33

9000 Series

Image 33
Contents Series Reference Documents Table of Contents Rear Wheels Limited Warranty Wheelchair TIE-DOWN Restraints and Seat Restraints Special NotesImportant Notice Label Location9000 SL Typical Product Parameters9000 XT Typical Product Parameters XT Recliner 9000 XDT Stability All Models General GuidelinesAnti-Tippers Operating InformationStability Recliner Models Only Weight Training Weight LimitationTire Pressure Checklist Safety INSPECTION/TROUBLESHOOTINGMaintenance TroubleshootingMaintenance Safety Precautions Suggested Maintenance ProceduresSafety INSPECTION/TROUBLESHOOTING Seat and Back Adjusting Back AngleSL without Adjustable Back Angle Option Adjusting Back HeightSL with Adjustable Back Angle Option and 9000 XT/XDT Adjusting Seat WidthPivot Link Adjusting Seat Width 9000XT Model Adjusting Seat DepthMounting Screws XDT and 9000 SLSeat and Back Front Casters Front Caster Mounting AdjustmentsWheelchair Frame Repositioning/Replacing Cam Changing Seat-to-Floor Height/Seat-to-Floor Angle Seat to FloorAngle ‐ a 3 seat‐to‐floor angle is the only available angle Adult/Tall Frame Style Super Low Frame StyleAngle Adult/Hemi Frame StylesForward Rearward Numbers Position Forward Rearward Position Forward Rearward Numbers Chart 7 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 9 Seat-to-Floor Height of 17½ inches and 0 Angle Rear Wheel Position ANTI-TIP Front Caster Offset Axle Option Forward Rearward Chart 15 Seat-to-Floor Height of 19½ inches and 6 Angle Rear Wheel Position ANTI-TIP Front Caster Chart 18 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 20 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 21 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 24 Seat-to-Floor Height of 16½ inches and 0 Angle Chart 27 Seat-to-Floor Height of 17½ inches and 0 Angle Chart 29 Seat-to-Floor Height of 18½ inches and 6 Angle Chart 31 Seat-to-Floor Height of 17½ inches and 6 Angle Chart 32 Seat-to-Floor Height of 17½ inches and 3 Angle Chart 35 Seat-to-Floor Height of 16½ inches and 3 Angle Chart 38 Seat-to-Floor Height of 15½ inches and 3 Angle Removing/Installing Rear Wheels Rear WheelsQuick-Release Axles Detent Pin Permanent AxlesModels with Offset Axle Option Rear Wheels Spacers Adjusting Wheelbase Length Adjusting Quick-Release AxleReplacing Release Handle ReclinerReplacing Release Handle Adjusting Cable Assembly TensionAdjusting Cable Assembly Tension Replacing Cable AssemblyDisconnecting/Connecting Lower Cable Assembly DisconnectingConnecting Recliner Disconnecting/Connecting Lower Cable Assembly Replacing Threaded Sector Replacing Threaded SectorReplacing Back Tube Replacing Locking RodRecliner Removing Removing/Installing Spring Lift MechanismRemoving/Installing Spring Lift Mechanism InstallingReplacing Recliner Tube Replacing Recliner Tube Adjusting Seat Width Pivot Link 10 Adjusting Seat Width 11 Adjusting Seat Depth Using Attendant Operated Wheel Locks Using/Adjusting Wheel LocksWith Patient Operated Wheel Locks With Attendant Operated Wheel Locks14 Using Attendant Operated Wheel Locks Adjusting Attendant Operated Wheel LocksChanging Seat-to-Floor Height 15 Adjusting Attendant Operated Wheel Locks16 Changing Seat-to-Floor Height Installing Anti-TippersRecliner XT Recliner Installing/Adjusting Anti-tippers Installing Anti-TippersANTI-TIPPERS/WHEEL Locks Installing Anti-Tippers Adjusting Anti-TippersUsing Patient Operated Disk Wheel Locks Using/Adjusting Disk Wheel LocksUsing Patient Operated Disk Wheel Locks Adjusting Patient-Operated Wheel LocksAdjusting Patient-Operated Wheel Locks Installing Wheel Lock Shoe Extensions Installing Wheel Lock Shoe ExtensionsANTI-TIPPERS/WHEEL Locks Limited Warranty Made in Mexico
Related manuals
Manual 30 pages 6.48 Kb Manual 60 pages 56.17 Kb