
4 | E n g l i s h |
A c c e s s o r y & R e p l a c e m e n t I t e m s / S e t - U p / O p e r a t i o n
ACCESSORY/REPLACEMENT ITEMS
The following items can be purchased separately as accessories or replacement items for your 7305 Series DeVilbiss Suction Unit:
Description | Part No. |
6’ Patient Tubing | |
12V DC power cord (1each) | |
1200 ml Reusable collection bottle (16 each) | |
800 ml Disposable collection bottle (48 each) | |
Switch mode AC to DC adapter/charger | |
12V DC high capacity rechargeable battery (1 each) | |
Carrying case | |
Replacement gauge | |
Bacteria filter | |
Circuit board (7305P series & converted battery units) | |
Circuit board (7305D series) | |
High capacity battery conversion kit | |
(battery, |
|
Vacuum gauge test fixture | |
Hospital grade line cord (120 VAC) | |
Line cord for US | |
Line cord for Continental Europe | |
Filter, 800ml collection bottle, elbow & tubing package | |
1200ml bottle package |
SET-UP
1.Connect either end of the 4" tubing to the tubing connector then connect the other end to the bacteria filter. Ensure that the clear side of the bacteria filter is toward elbow and bottle when
2.The bacteria filter should then be connected to the 90˚ elbow connection, and the 90˚ connection should be connected to the top of the can- ister lid where it says <Vacuum>.
3.The 6' patient tubing should be connected to the canister lid at the outlet labeled <Patient>.
4.Please assure that all connections are secure and without leaks before using.
5.Verify that unit is at desired suction level before beginning patient suction.
HOW TO OPERATE YOUR 7305 SERIES DEVILBISS SUCTION UNIT
Before connecting the unit to the AC adapter or 12V DC cord, make sure that the power switch located on the side of the unit is in the “Off” position. Select power source desired.
LED Explanations:
L1- Green– External power supplied to unit from AC power source or DC cord. Illuminated when external power is supplied.
L2 - Yellow– Battery is being charged. Light will go out when battery is fully charged. (7305P Series only)
L3 - Red– Low battery. Seek another power source and charge battery as soon as possible when light remains on continuous. (7305P Series only)
AC OPERATION– Plug the small connector of the AC adapter into the DC power input located on the side of the unit. Plug the AC end into a grounded
NOTE– The power supply may become warm to the touch during charging or running of the unit. This is normal.
12V DC OPERATION– (such as a car lighter receptacle). Plug the small connector of the DC power cord into the DC power input on the side of the unit. Plug the large connector into the 12V DC power receptacle of the automobile.
BATTERY OPERATION– Verify that your unit has an internal rechargeable battery; factory installed on models 7305P series or provider installed on models 7305D series (installed as an option). To ensure proper operation from internal battery, fully charge the battery for
Once the power source is selected, simply turn the unit “On” using the power switch located on the side of the unit. The power indicator light (displayed on the top of the unit) will indicate which power source is being used by staying continuously lit when external power is connected.