A&D HW-200KGV, HW-100KGL, HG-60KGV, HW-60KGL, HW-200KGL, HW-10KGV Preparation Setting Parameters

Page 28

Function table

Meaning & Purpose

f8 4

When the display is a stable value, the scale accumulates the data

 

automatically. The next accumulation can be performed after the

 

display returns to near-zero.

 

Use Recording the number and mass of articles removed from the

 

pan. (Put the articles on the pan. Press the

 

switch at each

 

TARE

 

removal.)

 

 

 

 

f8 5

At each finish of the full/dribble batch function, the scale accumulates

 

the data automatically.

 

Use Packaging articles like a powder, it is used for recording the

 

bag number and total mass.

 

 

 

 

10.1 Preparation (Setting Parameters)

Step 1 Turn off the display.

Press the ON/OFF switch while the ZERO switch is pressed and held. The function table is displayed.

Step 2 Press the ENTER switch to display an item of the accumulation function ( f8 ).

Step 3 Select a parameter of the accumulation function ( f8 1 ~ f8 4 ) with the ^ switch.

Step 4 Press the Press the from weighing

ENTER switch to store the new parameter.

F switch and then the ENTER switch to exit the function table. Then the scale displays the

mode.

HW-G OZIM v1a

HW-G Instruction Manual Page 26

Image 28
Contents HW-G Series Page Contents HW-G Ozim v1a Compliance Compliance with FCC rulesOutline and Features All Accessories UnpackingAccessories and Options list Type Products AccessoriesOrder code or option name Accessories Options ListPrecautions for Operating the Scale Precautions for Installing the ScalePrecautions for Storing the Scale Installing the Scale Secure the ColumnStpe 3 Secure the Display Unit Fit the PanConnect the Power Adjust the Display UnitLevel the Scale Installing the Batteries for Type L Names Display and Symbols OFFHW-G Ozim v1a Switches HW-G Ozim v1a Turning the Scale On/Off & Basic Weighing Basic OperationMemo Type L with Batteries Tare and Net Display Semi-Automatic Tare Input by WeighingMode Switch Changing Unit & Mode Counting Mode Storing a Unit MassCounting the number of articles Percentage Mode Storing a 100% MassReading Percentage Accumulation Function Operation and SwitchesFunction table Meaning & Purpose Preparation Setting Parameters Operation and Performance Examples ExampleComparator Function Comparator SignComparison Condition Function table Meaning and PurposeSwitch to display an item Step If one Has Been selected, press Case Full/Dribble Batch Function Full/Dribble batch sub-function ComparatorHold Parameter and display an item of the full/dribble Switch to display the HI Simple Batch Function Function Table Meaning and purpose Simple batch functionPreparation Setting Parameters Mode Calibration Adjusting the Scale Gravity Acceleration Table Complete Calibration Procedure Gravity Acceleration CorrectionCalibration of the Zero Point Procedure for Setting Parameters Function Table15.2 Parameter List Display Meaning and purpose Function or full/dribble batch functionPrinting condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Data Format FormatFormat Stream Mode Preparation and Performance ExamplesCancel of tare Command ModeTare Preset tare Upper limit valueFinal value Preparation Setting Parameters Options Pin connections Pin No Signal name Direction Description17.1 RS-232C / Relay output / Buzzer OP-03 Pin No Signal name Direction Description 17.2 RS-422 / RS-485 / Relay output OP-04Installing OP-04 Communication Format Zero Lower limit valueReset of Accumulation data and number Accumulation data outputAccumulation count output Final valueInternal Printer for Type V OP-06 SpecificationConsumables Disassembly InstallationPerformance Check HW-G series HW-GVDimensions HW-G Ozim v1a Maintenance Check Points Before Calling MaintenanceRepair This situation Confirm these items