16.2 Stream Mode
The scale outputs the current display data at the same time as refreshing the display. The scale does not output data while in the setting mode.
| Averaging function table | Refresh rate | ||
| f13 | 0 | Normal weighing | Approximately 7 times/s while the display is |
|
|
|
| unstable. |
|
|
|
| Approximately 4 times/s when the display is stable |
|
|
|
|
|
| f13 | 1 | A person’s weight | Approximately 4 times/s |
|
|
|
|
|
| f13 | 1 | Animal weighing | Approximately 4 times/s |
|
|
|
|
|
16.2.1 Preparation and Performance (Examples)
Step 1 Turn off the display.
Press the ON/OFF switch while the ZERO switch is pressed and held. The function table is displayed.
Step 2 Select a parameter for the “baud rate ( f4 )” using the ENTER and ^ switches.
Step 3 Select “stream mode ( f5 0 )” of “output” using the ENTER and ^ switches.
Step 4 Select “format 1 ( f15 0 )” of “format” using the
ENTER and ^ switches.
Step 5 Press the ENTER switch to store the new parameters. The scale returns to normal weighing and outputs the data continuously.