A&D HG-60KGV, HW-100KGL, HW-60KGL, HW-200KGL, HW-200KGV Percentage Mode, Storing a 100% Mass

Page 25

9 Percentage Mode

The percentage mode is to display a mass value in the unit of “%”.

It is necessary to store a 100% mass value in advance to use this function.

9.1 Storing a 100% Mass

Step 1 Press the MODE switch to display the unit %.

Step 2 Press the SET switch to enter the mode that stores a 100% mass.

Step 3 If necessary, with nothing on the pan press the ZERO switch to display zero.

Step 4 Gently place the 100% mass onto the pan. Press the ENTER switch to store the mass after the stability mark is displayed. Then the percentage unit is displayed.

Caution

When the sample is too light and it is not possible to calculate a 100% mass, the scale displays lo . and returns to step 3.

Pressing the ENTER switch after lo is displayed, the next unit is displayed.

Step 5 Remove all items from the pan.

HW-G Instruction Manual Page 23

HW-G OZIM v1a

Image 25

Contents HW-G Series Page Contents HW-G Ozim v1a Compliance with FCC rules ComplianceOutline and Features Unpacking All AccessoriesType Products Accessories Accessories and Options listOptions List Order code or option name AccessoriesPrecautions for Operating the Scale Precautions for Installing the ScalePrecautions for Storing the Scale Secure the Column Installing the ScaleStpe 3 Secure the Display Unit Fit the PanConnect the Power Adjust the Display UnitLevel the Scale Installing the Batteries for Type L Names OFF Display and SymbolsHW-G Ozim v1a Switches HW-G Ozim v1a Turning the Scale On/Off & Basic Weighing Basic OperationMemo Type L with Batteries Semi-Automatic Tare Input by Weighing Tare and Net DisplayMode Switch Changing Unit & Mode Storing a Unit Mass Counting ModeCounting the number of articles Storing a 100% Mass Percentage ModeReading Percentage Accumulation Function Operation and SwitchesFunction table Meaning & Purpose Preparation Setting Parameters Example Operation and Performance ExamplesComparator Sign Comparator FunctionComparison Condition Function table Meaning and PurposeSwitch to display an item Step If one Has Been selected, press Case Full/Dribble Batch Function Full/Dribble batch sub-function ComparatorHold Parameter and display an item of the full/dribble Switch to display the HI Function Table Meaning and purpose Simple batch function Simple Batch FunctionPreparation Setting Parameters Mode Calibration Adjusting the Scale Gravity Acceleration Table Gravity Acceleration Correction Complete Calibration ProcedureCalibration of the Zero Point Function Table Procedure for Setting Parameters15.2 Parameter List Function or full/dribble batch function Display Meaning and purposePrinting condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Format Data FormatFormat Preparation and Performance Examples Stream ModeCancel of tare Command ModeTare Upper limit value Preset tareFinal value Preparation Setting Parameters Options Pin connections Pin No Signal name Direction Description17.1 RS-232C / Relay output / Buzzer OP-03 17.2 RS-422 / RS-485 / Relay output OP-04 Pin No Signal name Direction DescriptionInstalling OP-04 Communication Format Lower limit value ZeroAccumulation data output Reset of Accumulation data and numberAccumulation count output Final valueInternal Printer for Type V OP-06 SpecificationConsumables Installation DisassemblyPerformance Check HW-GV HW-G seriesDimensions HW-G Ozim v1a Check Points Before Calling Maintenance MaintenanceRepair This situation Confirm these items