A&D HW-10KGV, HW-100KGL, HG-60KGV, HW-60KGL, HW-200KGL, HW-200KGV Operation and Performance Examples

Page 29

10.2 Operation and Performance (Examples)

Example 1

Weighing each article, the scale makes the accumulation according to

Step 1 Press the MODE switch to display M+ or

.

f8 3

.


Step	2	Press the	ZERO		switch to reset the accumulation data.
Step	3	Return to the kg mode using the						switch.
							MODE
		Press the			switch with nothing on the pan.
			ZERO
Step	4	Put an article on the pan. Wait for the stability mark to be displayed and the
		value to blink. Remove the article and, if necessary, press the								switch.
									ZERO
Step	5	Weigh additional articles using step 4.
Step	6	Press the				switch to display the number of articles and total mass with
				MODE
		M+ or	displayed.

Example 2

This example accumulates the articles that were removed from the pan. The function parameter is set to f8 4 .

Step 1 Enter into the kg mode using the MODE switch.

Put all articles on the pan and press the TARE switch.

Step 2 Press the

MODE

switch to display M+ or .


Step	3	Press the	ZERO	switch to reset the accumulation data.
		Retun to kg mode with the				switch.
		Retun to kg mode with the			MODE	switch.
Step	4	Remove an article from the pan. Wait for the stability mark to be displayed and
		the value to be blinking. Press the						switch.
		the value to be blinking. Press the					TARE	switch.
Step	5	Remove additional articles using step 4.

Step 6 Press the

MODE

switch to display the number of articles and total mass

removed, with M+ or displayed.

HW-G Instruction Manual Page 27

HW-G OZIM v1a

Image 29

Contents HW-G Series Page Contents HW-G Ozim v1a Compliance with FCC rules ComplianceOutline and Features Unpacking All AccessoriesType Products Accessories Accessories and Options listOptions List Order code or option name AccessoriesPrecautions for Storing the Scale Precautions for Installing the ScalePrecautions for Operating the Scale Secure the Column Installing the ScaleStpe 3 Secure the Display Unit Fit the PanLevel the Scale Adjust the Display UnitConnect the Power Installing the Batteries for Type L Names OFF Display and SymbolsHW-G Ozim v1a Switches HW-G Ozim v1a Memo Basic OperationTurning the Scale On/Off & Basic Weighing Type L with Batteries Semi-Automatic Tare Input by Weighing Tare and Net DisplayMode Switch Changing Unit & Mode Storing a Unit Mass Counting ModeCounting the number of articles Storing a 100% Mass Percentage ModeReading Percentage Function table Meaning & Purpose Operation and SwitchesAccumulation Function Preparation Setting Parameters Example Operation and Performance ExamplesComparator Sign Comparator FunctionComparison Condition Function table Meaning and PurposeSwitch to display an item Step If one Has Been selected, press Case Full/Dribble Batch Function Hold ComparatorFull/Dribble batch sub-function Parameter and display an item of the full/dribble Switch to display the HI Function Table Meaning and purpose Simple batch function Simple Batch FunctionPreparation Setting Parameters Mode Calibration Adjusting the Scale Gravity Acceleration Table Gravity Acceleration Correction Complete Calibration ProcedureCalibration of the Zero Point Function Table Procedure for Setting Parameters15.2 Parameter List Function or full/dribble batch function Display Meaning and purposePrinting condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Format Data FormatFormat Preparation and Performance Examples Stream ModeTare Command ModeCancel of tare Upper limit value Preset tareFinal value Preparation Setting Parameters 17.1 RS-232C / Relay output / Buzzer OP-03 Pin connections Pin No Signal name Direction DescriptionOptions 17.2 RS-422 / RS-485 / Relay output OP-04 Pin No Signal name Direction DescriptionInstalling OP-04 Communication Format Lower limit value ZeroAccumulation data output Reset of Accumulation data and numberAccumulation count output Final valueConsumables SpecificationInternal Printer for Type V OP-06 Installation DisassemblyPerformance Check HW-GV HW-G seriesDimensions HW-G Ozim v1a Check Points Before Calling Maintenance MaintenanceRepair This situation Confirm these items