A&D HW-10KGL, HW-100KGL, HG-60KGV, HW-60KGL, HW-200KGL, HW-200KGV, HW-10KGV Display and Symbols, Off

Page 15
The weighing value is within the zero-band. The full/dribble batch process is above the zero-band.
The start or end of the full/dribble batch process above the zero-band.

6.1 Display and Symbols

Display and Symbols

Meaning

 

Stability mark.

 

 

When the current weight value is not changing, this mark

 

is displayed. The reading may now be taken.

 

 

 

 

 

 

 

Zero point mark.

 

 

With nothing

on the pan and pressing the

 

 

 

 

switch or with a mass on the pan and pressing the

 

 

ZERO

 

 

switch, this mark is displayed. The zero point is the

 

TARE

 

starting point to weighing.

Net mark.

After pressing the TARE switch this mark is displayed to show net weight is displayed

Preset tare mark.

When storing a tare with digital input this mark blinks.

Accumulation mark.

When using the accumulation function, this mark is displayed.

Low battery mark for type L.

When the battery power is low this mark is displayed.

Replace with six new batteries.

Ready mark for the full/dribble batch function. This mark shows:

ON

OFF

Blinking

The comparator indicator.

Using the comparator function and comparing a weighing value with the upper and lower limits, the result is indicated.

Using the full/dribble batch function, the full flow gate indicator is shown as OK, the dribble flow gate indicator as HI and the zero band indicator as LO.

Example:- Display of zero (zero point).

With an empty weighing pan by pressing the ZERO switch:-

The Zero mark is displayed.

The stability mark is displayed.

HW-G Instruction Manual Page 13

HW-G OZIM v1a

Image 15
Contents HW-G Series Page Contents HW-G Ozim v1a Compliance with FCC rules ComplianceOutline and Features Unpacking All AccessoriesType Products Accessories Accessories and Options listOptions List Order code or option name AccessoriesPrecautions for Installing the Scale Precautions for Operating the ScalePrecautions for Storing the Scale Fit the Pan Installing the ScaleSecure the Column Stpe 3 Secure the Display UnitAdjust the Display Unit Connect the PowerLevel the Scale Installing the Batteries for Type L Names OFF Display and SymbolsHW-G Ozim v1a Switches HW-G Ozim v1a Basic Operation Turning the Scale On/Off & Basic WeighingMemo Type L with Batteries Semi-Automatic Tare Input by Weighing Tare and Net DisplayMode Switch Changing Unit & Mode Storing a Unit Mass Counting ModeCounting the number of articles Storing a 100% Mass Percentage ModeReading Percentage Operation and Switches Accumulation FunctionFunction table Meaning & Purpose Preparation Setting Parameters Example Operation and Performance ExamplesFunction table Meaning and Purpose Comparator FunctionComparator Sign Comparison ConditionSwitch to display an item Step If one Has Been selected, press Case Full/Dribble Batch Function Comparator Full/Dribble batch sub-functionHold Parameter and display an item of the full/dribble Switch to display the HI Function Table Meaning and purpose Simple batch function Simple Batch FunctionPreparation Setting Parameters Mode Calibration Adjusting the Scale Gravity Acceleration Table Gravity Acceleration Correction Complete Calibration ProcedureCalibration of the Zero Point Function Table Procedure for Setting Parameters15.2 Parameter List Function or full/dribble batch function Display Meaning and purposePrinting condition when using option OP-06 for type Function to hold the current display value. When 16 RS-232C Serial Data Interface Format Data FormatFormat Preparation and Performance Examples Stream ModeCommand Mode Cancel of tareTare Upper limit value Preset tareFinal value Preparation Setting Parameters Pin connections Pin No Signal name Direction Description Options17.1 RS-232C / Relay output / Buzzer OP-03 17.2 RS-422 / RS-485 / Relay output OP-04 Pin No Signal name Direction DescriptionInstalling OP-04 Communication Format Lower limit value ZeroFinal value Reset of Accumulation data and numberAccumulation data output Accumulation count outputSpecification Internal Printer for Type V OP-06Consumables Installation DisassemblyPerformance Check HW-GV HW-G seriesDimensions HW-G Ozim v1a This situation Confirm these items MaintenanceCheck Points Before Calling Maintenance Repair