Braun 6640, 6680, 6620 manual Inserting the cartridge, Shaving

Inserting the cartridge

a)Disconnect the power supply cord from the shaver.

b)Open latch and pull away cover.

c)If necessary, remove old cartridge by its pull-out tag.

d)Remove sealing foil from new cartridge.

e)Insert cartridge as shown, push firmly.

f)Put cover in place and close latch.

•Only use original Braun cartridges.

•Depending on scale setting and your personal shaving habits, one cartridge will last for approximately 15 shaves.

•Do not attempt to refill cartridges.

•The cartridge can be removed and re-inserted later. In that case a small loss of liquid might occur. While travelling, do not take an unsealed cartridge along nor leave one in the shaver.

Shaving

a

c

e

b

d

f

GlideControl allows you to choose the amount of Shaving Conditioner you want to apply («min-max»): When you raise the distancing bar (moving the scale to «min»), the applicator will have less contact with your skin and will apply less Shaving Conditioner.

If you move the scale to «max», more Conditioner will be applied.

Please be aware that, in order to optimally pre-condition your skin, during the first seconds somewhat more Conditioner will be applied.

Before shaving you should not use moisturizing creme or lotions, as they might impair the effectiveness of the applicator. No need to restrict the use of After Shave or Eau de Toilette.

Turning on the shaver («start»):

The pivoting cutting system automatically adjusts to every contour of your face.

min max

start

13