stop |
+35°°C
+15°°C
Freeglider Freeglider
12
Charging the shaver
•When the shaver is completely discharged, you cannot know if it is switched on or not. When you connect the shaver to the mains, make sure the green charging light illuminates. If it does not, push the start/stop button (turning off the shaver). The shaver is only charging when the green light is on.
•First charging: Using the power supply cord set, connect the shaver to the mains and charge it for at least 4 hours (shaver and adapter might get warm). Once the shaver is completely charged, shave without the cord until fully discharged. Then recharge to full capacity again (subse- quent charges will take about 1 hour).
•A full charge will give up to 50 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles.
•Best environmental temperature range for charging is 15 °C to 35 °C.
Indicator lights
The green charging light shows that the shaver is being charged. When the rechargeable battery is fully charged, the charging light goes off. If later on, the charging light comes on again, this indicates that the shaver is being recharged to maintain its full capacity.
Model 6680 only: The red
Preserving the cell unit
In order to maintain the optimum capacity of the rechargeable battery, the shaver has to be fully dis- charged (by shaving) every 6 months approximately. Then recharge the shaver to full capacity again.
Do not expose the shaver to temperatures of more than 50 °C for longer periods of time.
Shaving with the cord
If the rechargeable battery is discharged, you may also shave with the shaver connected to the mains via the power supply cord set (if the shaver does not run immediately, turn it off and charge for approx. 1 minute). Then shave with the cord connected.