Invacare 1080556 manual Adjusting T-ARM Transfer Assists AND/OR Side Guards Figure

ARMS PROCEDURE 5

ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE GUARDS (FIGURE 14)

1.Remove the T-arm from the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in this procedure of the manual.

2.Remove the two (2) socket screws that secure the side guard to the bottom clamp.

NOTE: Adjusting the side guards will directly affect the position of the transfer assist.

3.Perform one (1) of the following:

Small Side Guards - Move the bottom clamp up one (1) of two (2) mounting positions in the side guard.

Large Side Guards - Move the bottom clamp up one (1) of three (3) mounting positions in the side guard.

4.Re-secure the side guard to the bottom clamp with the two (2) socket screws.

5.Install the T-arm onto the wheelchair. Refer to INSTALLING/REMOVING T-ARMS in this procedure of the manual.

Side Guard T-Arm

Transfer Assist

Socket Screws

Bottom Clamp

FIGURE 14 - ADJUSTING T-ARM TRANSFER ASSISTS AND/OR SIDE

GUARDS

ARMS

Part No. 1080556 Rev. I 37 Solara™