BACK/SEAT
PROCEDURE 6 | BACK/SEAT |
This Procedure Includes the Following:
Folding/Unfolding Back Assembly
Installing/Removing the Stroller Handles
Installing/Removing/Adjusting the Adjustable Angle Stroller Handles
Installing/Replacing Seat Positioning Straps
Installing/Replacing Chest Positioning Straps
Installing/Replacing The Back Upholstery
Installing the Seat Cushion
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all attach- ing hardware is tightened securely - otherwise injury or damage may result.
FOLDING/UNFOLDING BACK ASSEMBLY (FIGURE 1)
WARNING
The back MUST be locked securely in place BEFORE using the wheelchair.
NOTE: When folding or unfolding the back, make sure the back release cord does not get caught in the release latches.
1.Do one (1) of the following:
A.UNFOLD - Push/pull the back towards rear of wheelchair until it locks in place.
B.FOLD - Pick up on the back release cord and push the back towards the front of the wheelchair.
Back Release Cord
Release Latch
FIGURE 1 - FOLDING/UNFOLDING BACK ASSEMBLY
Solara™ | 38 | Part No. 1080556 Rev. I |