Invacare 1080556 manual Angle Adjustment of the Contracture

Page 68

CONTRACTURE FOOTPLATE OPTION

PROCEDURE 11

CONTRACTURE FOOTPLATE OPTION

 

 

 

ANGLE ADJUSTMENT OF THE CONTRACTURE

FOOTPLATE (FIGURE 6)

 

Flat Screws

1. Loosen, but DO NOT, remove the two

Contracture

 

Assembly

 

(2) flat screws, washers and locknuts that

 

 

Contracture

secure contracture footplate to the

 

 

Footplate

footplate hinge.

 

 

 

2. Tilt the contracture footplate UP/

Footplate

 

DOWN to achieve desired angle.

Hinge

 

3. Retighten the two (2) flat screws,

NOTE: Mounting

 

washers and locknuts that secures

Washers

hardware removed

the contracture foot plate to the

for clarity only.

Lock Nuts

footplate hinge.

 

4. If necessary, repeat STEPS 1-3 on

NOTE: Bilateral contracture footplate shown

remaining contracture footplate.

for clarity.

 

 

FIGURE 6 - ANGLE ADJUSTMENT

 

OF THE CONTRACTURE

 

FOOTPLATE

CONTRACTURE FOOTPLATE DEPTH ADJUSTMENT

(FIGURE 7)

BILATERAL CONTRACTURE

NOTE: Observe the angle of the contracture

 

Flat Screws

 

 

footplate for reinstallation.

 

 

1. Perform one (1) of the following:

 

Mounting Hole

 

 

A.BILATERAL CONTRACTURE -

Remove the two (2) flat screws,

 

 

washers and locknuts that secure the

Contracture

 

contracture footplate to the footplate

 

Footplate

 

hinge.

 

 

 

B. CONTRACTURE PLATFORM -

 

Washers

Remove the four (4) flat screws that

Footplate Hinge

Lock Nuts

secure the contracture platform to

 

CONTRACTURE PLATFORM

the half clamps.

2. Move the contracture footplate to one (1)

 

of four (4) mounting hole.

Flat Screws

 

3. Perform one (1) of the following:

A.BILATERAL CONTRACTURE - Reinstall the two (2) flat screws, washers and locknuts that secure the contracture footplate to the footplate hinge.

B.CONTRACTURE PLATFORM - Reinstall the four (4) flat screws that secure the contracture platform to the half clamps. Tighten securely.

Contracture

Platform

FIGURE 7 - CONTRACTURE

FOOTPLATE DEPTH

ADJUSTMENT

Solara™

68

Part No. 1080556 Rev. I

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Solara SolaraLimited Solara Table of Contents Procedure 7 TILT-IN-SPACE Special Notes Special NotesHeavy Duty Package only Label LocationsLabel Locations Transport Ready Option only Specifications SpecificationsInformation for Healthcare PROFESSIONALS/ Assistants General GuidelinesAnterior Forward Tilt General GuidelinesProcedure General Guidelines Stability ALL ModelsStability ALL Models Except Recliners Stability WarningGeneral Warnings Stability Recliner Models onlyOperating Information Weight Training Weight LimitationCoping with Everyday Obstacles SAFETY/HANDLING of WheelchairsStability and Balance Unoccupied Occupied Percentage of Weight DistributionCenter Gravity General Guidelines Procedure General Guidelines Tipping Tipping Curbs Method 1 Wheelchair with Step TubesMethod 1 Wheelchair with Step Tubes Tipping Curbs Method 2 Wheelchair Without Step TubeStairways Method 2 WheelchairWithout Step Tube ESCALATORS? Sorry Transferring to and from Other SeatsSafety Inspection Safety Inspection ChecklistSafety Inspection Troubleshooting MaintenanceProcedure 2SAFETY Inspection Maintenance Safety PrecautionsTransporting Transporting the Invacare SolaraTransporting INSTALLING/REMOVING Swingaway Footrest Figure Procedure Front RiggingsInstalling Front RiggingsMFX and 90 Footrests Figure Adjusting Swingaway Footrest HeightHeight Adjustment Ranges Installing Adjustable Angle FLIP-UP Footplate Hinge Figure Installing Adjustable Angle FLIP-UP Footplate HingeReplacement Figure COMPOSITE/ARTICULATING Footplate Heel LoopAdjusting the Calfpad Adjusting the Elevating LEGREST/CALFPAD Assembly FigureAdjusting the Legrest Arms Procedure Installing ArmrestRemoving Armrest ArmsProcedure Arms Adjusting Armrest INSTALLING/REMOVING/ADJUSTING Dual Point ArmrestUSING/INSTALLING/ADJUSTING Locking Cantilever Arms Using Locking Cantilever Arms FigureAdjusting Locking Cantilever ARM Height Figure RearAdjusting Locking Cantilever ARM Angle Figure Procedure Arms110 120 Adjusting NON-LOCKING Cantilever ARM Height Figure USING/INSTALLING/ADJUSTING NON-LOCKING Cantilever ArmsUsing NON-LOCKING Cantilever Arms Figure Detail a Side View of CAM ARM AngleARM PAD Replacement for Cantilever Arms Figure INSTALLING/REMOVING T-ARMS FigureInstalling T-ARMS Removing T-ARMSAdjusting the T-ARMS Adjusting T-ARM Height FigureProcedure Arms Adjusting T-ARM Depth Figure Adjusting T-ARM Sockets FigureAdjusting T-ARM Transfer Assists AND/OR Side Guards Figure Adjusting T-ARM Transfer Assists AND/OR Side GuardsBACK/SEAT FOLDING/UNFOLDING Back Assembly FigureProcedure BACK/SEAT Removing INSTALLING/REMOVING the Stroller Handles FigureInstalling Removing Figure Installing FigureDetail a QUICK-RELEASE PIN Installed Adjusting Figure Locked PositionINSTALLING/REPLACING Seat Positioning Straps Figure ReplacingINSTALLING/REPLACING the Back Upholstery Figure BACK/SEATPROCEDUREWheelchair Front Installing the Seat Cushion FigureRear TILT-IN-SPACE Engaging TILT-IN-SPACE FigureTILT-IN-SPACE Adjusting Trigger Release Cables Figure Procedure TILT-IN-SPACETilt Locking Collar Adjusting Upper Tilt Locking Collar FigurePositioning Tilt Locking Collars Adjusting Lower Tilt Locking Collar INSTALLING/REMOVING Rear Wheels WHEELS/FORKSQUICK-RELEASE Figure WHEELS/FORKSAdjusting the QUICK-RELEASE Axle Figure Procedure WHEELS/FORKS Permanent Axle FigurePermanent Axle QUICK-RELEASE AxleSEAT-TO-FLOOR Height Adjustment Adjusting Forks FigureWheel Lock Adjustment Figure Procedure Wheel LOCKS/ANTI-TIPPERSWheel LOCKS/ ANTI-TIPPERS Foot Activated Wheel Lock Inch Wheels onlyUsing the Wheel Locks INSTALLING/ADJUSTING ANTI-TIPPERS FigureFoot Activated Wheel Locks 12-INCH Wheels only Figure LOCKS/ -TIPPERSINSTALLING/ADJUSTING ANTI-TIPPERS ANTI-TIPPER Facing DownRecliner Back Option Recliner Operation FigureRecliner Back Option Procedure Recliner Back Option Recliner OperationAdjusting the Recliner Cables Replacing BACK/HEADREST Upholstery FigureBack Upholstery Headrest UpholsteryRemoving Existing Recliner Cables Installing NEW Recliner CablesReplacing the Recliner Cables Figure Option Detail aDetail B Replacing the GAS Cylinders Figure Actuator Centered TOO LOW TOO HighReplacing the GAS Cylinders Performing Adjustments Adjusting the GAS Cylinders FigureDetermining Necessary Adjustments Detail B Must TOO TOO Look LOW High Like this Installing the Contracture Footplate Assembly Procedure Contracture Footplate OptionInstalling the Crossmember Assembly Figure Contracture Footplate OptionDetail B Lock Contracture Assembly Angle Adjustment Figure Using the Optional QUICK-RELEASE PIN FigureAngle Adjustment of the Contracture Contracture Footplate Height Adjustment Figure Bilateral ContractureReplacing the Contracture Footplate Heel Loop Figure Replacing the Contracture Footplate Heel LoopTransport Ready Option Transport Ready OptionCompliance Information Securing the Wheelchair to the VehicleWHEELCHAIR-ANCHORED Belts Figure Securing the OccupantSecurement Points Figure Front Rear Procedure Transport Ready Option Detail a Pelvic Belt WHEELCHAIR-ANCHORED BeltsTransport Ready Positioning Belts FigurePositioning Belts Part No Rev Solara Warranty WarrantyOne Invacare Way
Top Page Image Contents