RECLINER BACK OPTION | PROCEDURE 10 |
REPLACING BACK/HEADREST UPHOLSTERY (FIGURE 2)
BACK UPHOLSTERY
1.Remove the ten (10) phillips screws and washers that secure the back upholstery to the back canes.
2.Remove existing back upholstery from back canes.
3.Install new back upholstery onto the back canes.
4.Install the ten (10) phillips screws and washers that secure the back upholstery to the back canes.
HEADREST UPHOLSTERY
1.Remove the six (6) phillips screws and washers that secure the headrest upholstery to the headrest extensions.
2.Remove the existing headrest upholstery from the headrest extensions.
3.Install the new headrest upholstery onto the headrest extensions.
4.Install the six (6) phillips screws and washers that secure the headrest upholstery to the headrest extensions.
Headrest
Upholstery
Headrest Extension
Back Cane | Washer |
| |
Back Upholstery | Phillips Screw |
|
FIGURE 2 - REPLACING BACK/HEADREST UPHOLSTERY
ADJUSTING THE RECLINER CABLES
NOTE: Refer to ADJUSTING THE GAS CYLINDERS in this section of the manual.
RECLINER BACK OPTION
Part No. 1080556 Rev. I | 57 | Solara™ |