Invacare 1080556 manual INSTALLING/REPLACING the Back Upholstery Figure, Back/Seatprocedure

Page 43

BACK/SEATPROCEDURE 6

INSTALLING/REPLACING CHEST POSITIONING STRAPS

(FIGURE 6)

Back Cane

INSTALLING

 

1. Position the chest positioning strap to one

Locknut

(1) of the holes on the back cane.

 

NOTE: The standard recommended position for the chest

Hex Screw

positioning strap is in the top hole of the back cane, but

 

may be mounted according to the user's needs.

 

2. Secure the chest positioning strap to the

Chest Positioning Strap

back canes with the NEW/EXISTING hex

 

screw and locknut as shown in FIGURE 9.

 

3. Repeat STEPS 1-2 for opposite side.

FIGURE6 -INSTALLING/REPLACING

 

REPLACING

CHEST POSITIONING STRAP

 

1.Remove the hex screw that secures the chest positioning strap to the back cane.

2.Discard EXISTING chest positioning strap.

3.Repeat STEPS 1-2 for opposite side, if necessary.

4.Install the NEW chest positioning strap. Refer to INSTALLING CHEST POSITIONING STRAPS in this procedure of the manual.

INSTALLING/REPLACING THE BACK UPHOLSTERY (FIGURE 7)

BACK/SEAT

INSTALLING

1. Position the back upholstery on the back

cane as shown in FIGURE 7.

Washer

Phillips

2. Starting with the top two (2) mounting

holes secure the back upholstery to the

back canes with the ten (10) phillips

screws and washers.

Back Cane

Screw

Back

REPLACING

1.Remove the ten (10) phillips screws and washers that secure the back upholstery to the back canes.

2.Remove existing back upholstery from back canes.

3.Install new back upholstery onto the back canes.

Upholstery

FIGURE 7 - INSTALLING/ REPLACING THE BACK UPHOLSTERY

4.Install the ten (10) phillips screws and washers that secure the back upholstery to the back canes.

Part No. 1080556 Rev. I

43

Solara™

Image 43
Contents Solara SolaraLimited Solara Table of Contents Procedure 7 TILT-IN-SPACE Special Notes Special NotesLabel Locations Label LocationsHeavy Duty Package only Transport Ready Option only Specifications SpecificationsGeneral Guidelines Information for Healthcare PROFESSIONALS/ AssistantsGeneral Guidelines Anterior Forward TiltStability Warning Procedure General GuidelinesStability ALL Models Stability ALL Models Except ReclinersOperating Information Stability Recliner Models onlyGeneral Warnings Weight Limitation Weight TrainingStability and Balance SAFETY/HANDLING of WheelchairsCoping with Everyday Obstacles Center Gravity Percentage of Weight DistributionUnoccupied Occupied General Guidelines Tipping Curbs Method 2 Wheelchair Without Step Tube Procedure General Guidelines TippingTipping Curbs Method 1 Wheelchair with Step Tubes Method 1 Wheelchair with Step TubesWithout Step Tube Method 2 WheelchairStairways Transferring to and from Other Seats ESCALATORS? SorrySafety Inspection Safety Inspection ChecklistSafety Inspection Maintenance Safety Precautions TroubleshootingMaintenance Procedure 2SAFETY InspectionTransporting Transporting the Invacare SolaraTransporting Front Riggings INSTALLING/REMOVING Swingaway Footrest FigureProcedure Front Riggings InstallingHeight Adjustment Ranges Adjusting Swingaway Footrest HeightMFX and 90 Footrests Figure Installing Adjustable Angle FLIP-UP Footplate Hinge Installing Adjustable Angle FLIP-UP Footplate Hinge FigureCOMPOSITE/ARTICULATING Footplate Heel Loop Replacement FigureAdjusting the Legrest Adjusting the Elevating LEGREST/CALFPAD Assembly FigureAdjusting the Calfpad Arms Arms ProcedureInstalling Armrest Removing ArmrestINSTALLING/REMOVING/ADJUSTING Dual Point Armrest Procedure Arms Adjusting ArmrestRear USING/INSTALLING/ADJUSTING Locking Cantilever ArmsUsing Locking Cantilever Arms Figure Adjusting Locking Cantilever ARM Height FigureProcedure Arms Adjusting Locking Cantilever ARM Angle Figure110 120 Using NON-LOCKING Cantilever Arms Figure USING/INSTALLING/ADJUSTING NON-LOCKING Cantilever ArmsAdjusting NON-LOCKING Cantilever ARM Height Figure ARM Angle Detail a Side View of CAMRemoving T-ARMS ARM PAD Replacement for Cantilever Arms FigureINSTALLING/REMOVING T-ARMS Figure Installing T-ARMSAdjusting T-ARM Height Figure Adjusting the T-ARMSAdjusting T-ARM Sockets Figure Procedure Arms Adjusting T-ARM Depth FigureAdjusting T-ARM Transfer Assists AND/OR Side Guards Adjusting T-ARM Transfer Assists AND/OR Side Guards FigureProcedure BACK/SEAT FOLDING/UNFOLDING Back Assembly FigureBACK/SEAT Installing INSTALLING/REMOVING the Stroller Handles FigureRemoving Detail a QUICK-RELEASE PIN Installed Installing FigureRemoving Figure Locked Position Adjusting FigureReplacing INSTALLING/REPLACING Seat Positioning Straps FigureBACK/SEATPROCEDURE INSTALLING/REPLACING the Back Upholstery FigureRear Installing the Seat Cushion FigureWheelchair Front TILT-IN-SPACE Engaging TILT-IN-SPACE FigureTILT-IN-SPACE Procedure TILT-IN-SPACE Adjusting Trigger Release Cables FigurePositioning Tilt Locking Collars Adjusting Upper Tilt Locking Collar FigureTilt Locking Collar Adjusting Lower Tilt Locking Collar WHEELS/FORKS INSTALLING/REMOVING Rear WheelsWHEELS/FORKS QUICK-RELEASE FigureQUICK-RELEASE Axle Adjusting the QUICK-RELEASE Axle FigureProcedure WHEELS/FORKS Permanent Axle Figure Permanent AxleAdjusting Forks Figure SEAT-TO-FLOOR Height AdjustmentFoot Activated Wheel Lock Inch Wheels only Wheel Lock Adjustment FigureProcedure Wheel LOCKS/ANTI-TIPPERS Wheel LOCKS/ ANTI-TIPPERSLOCKS/ -TIPPERS Using the Wheel LocksINSTALLING/ADJUSTING ANTI-TIPPERS Figure Foot Activated Wheel Locks 12-INCH Wheels only FigureANTI-TIPPER Facing Down INSTALLING/ADJUSTING ANTI-TIPPERSRecliner Back Option Recliner Operation FigureRecliner Back Option Recliner Operation Procedure Recliner Back OptionHeadrest Upholstery Adjusting the Recliner CablesReplacing BACK/HEADREST Upholstery Figure Back UpholsteryReplacing the Recliner Cables Figure Installing NEW Recliner CablesRemoving Existing Recliner Cables Detail B Detail aOption Actuator Centered TOO LOW TOO High Replacing the GAS Cylinders FigureReplacing the GAS Cylinders Determining Necessary Adjustments Adjusting the GAS Cylinders FigurePerforming Adjustments Detail B Must TOO TOO Look LOW High Like this Contracture Footplate Option Installing the Contracture Footplate AssemblyProcedure Contracture Footplate Option Installing the Crossmember Assembly FigureDetail B Lock Using the Optional QUICK-RELEASE PIN Figure Contracture Assembly Angle Adjustment FigureAngle Adjustment of the Contracture Bilateral Contracture Contracture Footplate Height Adjustment FigureReplacing the Contracture Footplate Heel Loop Replacing the Contracture Footplate Heel Loop FigureTransport Ready Option Transport Ready OptionSecuring the Wheelchair to the Vehicle Compliance InformationSecurement Points Figure Front Rear Securing the OccupantWHEELCHAIR-ANCHORED Belts Figure WHEELCHAIR-ANCHORED Belts Procedure Transport Ready Option Detail a Pelvic BeltPositioning Belts Figure Transport ReadyPositioning Belts Part No Rev Solara Warranty WarrantyOne Invacare Way