BACK/SEAT
PROCEDURE 6 | BACK/SEAT |
INSTALLING/REMOVING/ADJUSTING THE ADJUSTABLE ANGLE STROLLER HANDLES
NOTE: Adjustable angle stroller handles are bolted onto recliners ONLY.
INSTALLING (FIGURE 3)
1.Remove plug buttons from both back canes.
2.Slide the adjustable height stroller handle into the back canes.
3.Align the mounting holes of the adjustable angle stroller handle and the back cane.
4.Secure adjustable angle stroller handle to the back canes with the two (2)
5.If necessary, adjust the height. Refer to ADJUSTING in this procedure of the manual.
REMOVING (FIGURE 3)
1.Press and hold the buttons on the
2.Remove the adjustable angle stroller handle from the back cane.
3. Install plug buttons.
NOTE: Plug buttons not shown for clarity.
(or bolt and locknut -
Recliners ONLY)
DETAIL "A" -
QUICK-RELEASE PIN INSTALLED
Back Cane
Detent
Ball
Stroller Handle
Back Cane
NOTE: Bolts and locknuts not shown. Bolts and locknuts install in same location as
FIGURE 3 - INSTALLING/REMOVING THE ADJUSTABLE ANGLE
STROLLER HANDLES
Solara™ | 40 | Part No. 1080556 Rev. I |