![](/images/new-backgrounds/1197175/19717537x1.webp)
Setting System Parameters
Night Transfer
Night Transfer
Incoming calls to your system can be made to route and ring different destinations, based on either two- or
Mode | ||
DAY | OFF | OFF |
|
|
|
DAY 2 | FLASH | N/A |
|
|
|
NIGHT | ON | ON |
|
|
|
Night Transfer can be locked by pressing 17/RFNa and dialing the NT Lock password (see the procedure outlined on the following page).
If the system has tenant service, up to four Tenant Night Transfer buttons (1LJKW 7UDQVIHUa) can be assigned and controlled independently.
➤To enable/disable night transfer
➤Press 1LJKW7UDQVIHU to toggle night transfer ON/OFF.
Night Transfer Lock/Unlock Password
The Night (NT) Lock/Unlock mode enables the Administrator’s station or an attendant console to lock the system into the Day, Day 2, or Night mode. By setting the system into different modes, incoming CO calls can be routed to different destinations.
In order for the Administrator station or the attendant console to perform such routing, it must be assigned with 1LJKW7UDQVIHU and 17/RFN buttons via system programming. Up to four 1LJKW7UDQVIHU and 17/RFNbuttons are allowed.
Check with the system installer for any additional information.
Strata DK System Administrator Guide 5/00 | 9 |