Setting System Parameters
System Messages, Names and Memos
➤To erase name/number display
1. | Press a [DN] + | Current information displays |
|
|
USER NAME? |
| |||
| . | on the lower line of the LCD. |
| |
|
|
| ||
|
|
|
|
|
2. | Press in the alpha | Blank characters replace the information. If all blanks | ||
| mode to enter blanks. | are entered, the telephone [PDN] displays on the LCD. | ||
3. | Press 6SNU. | The information is erased. |
|
|
|
|
|
|
|
➤To enter name/number information for other stations/devices
1.Turn Soft Keys OFF by pressing 0RGH+
.
2.Press a [DN] + .
3.Press 3DJH.
4.Dial the [PDN] of the station for which the name/number information is to be recorded.
5.Press 3DJH.
The Administrator station must be idle.
Current information for the Administrator station appears on the bottom line.
In this particular display, (.7 stands for the [PDN] of a digital, electronic or standard telephone.
Current information for station 111 appears on the bottom line.
You are prompted for the user name.
USER NAME?
DESK EKT NO.?
DESK EKT NO. NNN
USER NAME?
Strata DK System Administrator Guide 5/00 | 21 |