Setting System Parameters
Speed
Linked Speed Dial Example
Note Your system must be programmed for “Toll Restriction Override by System Speed Dial” to allow this example.
➤To store a CO line access code plus a long distance carrier access code (10288) and link to *690
In the following example, you are going to link 690 to a telephone number and store it in System Speed Dial location .
1.Press 5HGLDO +
6SHHG'LDO +
+[PDN] +
+5HGLDO
2.Store the System Speed Dial
information on Speed
Dial Codefrom the Administrator station.
3.Press 5HGLDO +
6SHHG'LDO +
+6SHHG'LDO +
+5HGLDO.
The CO line access code and the long distance carrier code (910288) in the System Speed Dial location 690 is stored.
Note “I” displays when the [PDN] is stored.
♦[PDN] is used to automatically access internal dial tone before dialing .
♦ = is the CO line access code and
is the long distance carrier access code.
♦ is the System Speed Dial Code.
♦ is the System Speed Dial Code that is being linked to code .
♦ is the telephone number with area code.
30 | Strata DK System Administrator Guide 5/00 |