Toshiba DKA-AG-SYSTEMVD manual Night Transfer Lock Mode, To set the system in Night Lock Mode

Page 21

Setting System Parameters

Night Transfer

Night Transfer Lock Mode

After setting the 1LJKW￿7UDQVIHU button into the desired ring mode (Day/Day2/ Night), you can lock Night Transfer using the accompanying steps below.

To set the system in Night Lock Mode

1.Press 1LJKW￿ 7UDQVIHU to set the system into the Day or Day2 or Night Mode, with the handset on-hook.

2.Press 17￿/RFN.

3.Enter your password and press 17￿/RFN again.

The NT Lock LED flashes. The LCD prompts you to enter your password.

Y = Password digits

If the correct password is entered, the NT Lock LED remains steady red and the LCD displays the message “NT LOCK.”

If an incorrect password is entered, the NT Lock LED turns OFF.

NO.200

ENTER PASSWORD

NO.200

YYYY

NT LOCK

JAN 15 WED 02:00

Strata DK System Administrator Guide 5/00

11

Image 21
Contents System Administrator Guide Publication Information Contents Appendix a Access Codes Introduction Organization Equipment NotesConventions Important Notes Action/Response TableVii Related Documents and MediaViii Setting System Parameters Auto Attendant CO Line Assignments Auto AttendantSystem Auto Attendant Dialing Plan Auto Attendant Announcement Recording Recommendations To enter or change the Disa security code Direct Inward System Access Disa Security CodeEmergency 911 Calls To cancel the Disa security codeOr press DN + + To make an Emergency 911 callEmergency Calling from the Attendant Console Night Transfer Lock/Unlock Password To enable/disable night transferNight Transfer To assign or change Night Lock/Unlock Password To set the system in Night Lock Mode Night Transfer Lock ModeSetting Date/Time/Day To set the dateTo set the time To set the day of the week Station Relocation Soft KeysTo turn Soft Keys on To turn Soft Keys offTo turn on the Auto Station Relocation feature Automatic RelocationTo physically relocate swap Station a and B Relocation by Special Dial To turn on the Special Dial Station Relocation featureTo relocate swap Station a and B To write LCD messages, names, or numbers System Messages, Names and MemosUser LCD Name/Number Display To clear name/number display To enter name/number information for your telephoneTo enter name/number information for other stations/devices To erase name/number displayTo erase other station name/number displays Clearing a Speed Dial Entry System Speed Dial NumbersAccessing the Stored Number Speed Dial-Advanced FeaturesFeature Access Codes To store a feature onto a 6 buttonSetting System Parameters Feature Access Codes Features Feature Access Code Sequence Setting System Parameters Speed Dial Pause and Flash Storage Speed Dial Number LinkingTo link system/system speed dial numbers Setting System Parameters Linked Speed Dial Example Speed Dial Memo To use the new linkTo program names and numbers Enter up to To check a Speed Dial number To view and/or dial a Speed Dial numberDial tone ~ represent override Codes 1 and 2 respectively Toll Restriction Override/Traveling Class Codes~ or To add or change verified account codes Verified Account CodesTo delete verified account codes Setting System Parameters CO Line Access Codes Access CodesTo access a line Feature Access CodesPaging Group Codes To enter a paging group access codeRCTUBA/BB, RCTUC/D, B1CU Speed Dial Access CodesUser Name/Number Directory Directories/RecordBSpeed Dial Memo Directory Telephone Location Record Directories/Record Index Index ~ W Index