Toshiba DKA-AG-SYSTEMVD manual To relocate swap Station a and B

Page 27

Setting System Parameters

Station Relocation

To relocate (swap) Station A and B

1.From Station A, press a [DN] + ￿￿￿￿111

(111 = [DN] of Station B).

2.From Administrator

station, press a [DN]

+￿￿￿￿￿ to turn off Special Dial Station

Relocation, then press

6SNU.

You hear confirmation tone. Station A now has the buttons and features of Station B and vice versa.

After Station Relocation is turned off, you hear a confirmation tone. If you hear a busy tone, Station Relocation was already turned off, or you did not dial from the Administrator station.

Note After the relocation is completed, exchange the keystrips of the two telephones, if they are different, because a 10-button telephone replaced with a 20-button type telephone, retains the 10-button assignments.

Strata DK System Administrator Guide 5/00

17

Image 27
Contents System Administrator Guide Publication Information Contents Appendix a Access Codes Introduction Organization Equipment NotesConventions Important Notes Action/Response TableVii Related Documents and MediaViii Setting System Parameters Auto Attendant CO Line Assignments Auto AttendantSystem Auto Attendant Dialing Plan Auto Attendant Announcement Recording Recommendations To enter or change the Disa security code Direct Inward System Access Disa Security CodeEmergency 911 Calls To cancel the Disa security codeOr press DN + + To make an Emergency 911 callEmergency Calling from the Attendant Console Night Transfer Lock/Unlock Password To enable/disable night transferNight Transfer To assign or change Night Lock/Unlock Password To set the system in Night Lock Mode Night Transfer Lock ModeSetting Date/Time/Day To set the dateTo set the time To set the day of the week To turn Soft Keys off Soft KeysStation Relocation To turn Soft Keys onTo turn on the Auto Station Relocation feature Automatic RelocationTo physically relocate swap Station a and B Relocation by Special Dial To turn on the Special Dial Station Relocation featureTo relocate swap Station a and B To write LCD messages, names, or numbers System Messages, Names and MemosUser LCD Name/Number Display To clear name/number display To enter name/number information for your telephoneTo enter name/number information for other stations/devices To erase name/number displayTo erase other station name/number displays Clearing a Speed Dial Entry System Speed Dial NumbersTo store a feature onto a 6 button Speed Dial-Advanced FeaturesAccessing the Stored Number Feature Access CodesSetting System Parameters Feature Access Codes Features Feature Access Code Sequence Setting System Parameters Speed Dial Pause and Flash Storage Speed Dial Number LinkingTo link system/system speed dial numbers Setting System Parameters Linked Speed Dial Example Speed Dial Memo To use the new linkTo program names and numbers Enter up to To check a Speed Dial number To view and/or dial a Speed Dial numberDial tone ~ represent override Codes 1 and 2 respectively Toll Restriction Override/Traveling Class Codes~ or To add or change verified account codes Verified Account CodesTo delete verified account codes Setting System Parameters CO Line Access Codes Access CodesTo access a line Feature Access CodesPaging Group Codes To enter a paging group access codeRCTUBA/BB, RCTUC/D, B1CU Speed Dial Access CodesUser Name/Number Directory Directories/RecordBSpeed Dial Memo Directory Telephone Location Record Directories/Record Index Index ~ W Index