Toshiba DKA-AG-SYSTEMVD manual Enter up to

Setting System Parameters

Speed Dial—Advanced Features

4.	Enter up to 12
	alphanumeric
	characters, (see the
	figure at the right)
	using the station
	keypad.
5.	Press 0RGH.

Move Right (Alpha mode only)

Move Left

2358

Toggles between alphanumeric

characters

Scrolls alpha/ special characters

6.	Press [PDN], then
	enter the desired CO
	line access code, plus
	the telephone number
	(20 digits maximum).
7.	Press 5HGLDO.
8.	Repeat Steps 1~7 to
	enter more names/
	memos.

The number appears as you entered it. Speed Dial numbers and memos and their corresponding two- or three-digit codes can be recorded on the Speed Dial Memo Directory at the back of this guide.

Note If telephones use direct appearing CO line buttons to place outgoing calls–do not press [PDN] in Step 6.

The data is recorded into memory.

32 Strata DK System Administrator Guide 5/00