Setting System Parameters
Station Relocation
3.Plug the telephone that is moving into the wall jack at its new location.
4.From the
Administrator station, press [DN] +
to turn off Auto
Station Relocation, then press 6SNU.
The station is now moved to its new location while retaining its original [DNs] and features.
You hear confirmation tone. If you hear a busy tone, the Station Relocation feature was already turned off, or you did not dial from the Administrator station.
Relocation by Special Dial
This option enables two station numbers and their features to be exchanged with or without physically relocating the telephones. The exchange takes place through the use of special dial codes. For the procedure below, we are using Station A/B and Location 1/2 to demonstrate the exchange.
➤To turn on the Special Dial Station Relocation feature
1.From the Administrator station, press a [DN] +
to turn on the Special Dial Station Relocation feature
2.Press 6SNU.
You hear confirmation tone indicating that the Station Relocation feature is on. If you hear a busy tone, the Station Relocation feature was already turned on, or you did not dial from the Administrator station.
16 | Strata DK System Administrator Guide 5/00 |