Access Codes | A |
|
|
|
|
This appendix contains access codes for outside Speed Dial numbers, CO lines, Paging Group and Paging Zone Codes.
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a &2 or /LQH button, you can enter the appropriate code listed in Table 5 to access an outside line.
You can also store the code on a Speed Dial (6') button for
are storing a CO line access code onto a Speed Dial code, enter before the CO access code (e.g., to store code , enter ).
In some systems, is used as a general group code or to access Least Cost Routing (LCR). System users are required to dial in order to access an outside line. If you press in a system programmed with LCR, you may not hear internal dial tone, depending on system programming.
See your System Administrator for the code which applies to your telephone.
Strata DK System Administrator Guide 5/00 | 39 |