Toshiba DKA-AG-SYSTEMVD manual To make an Emergency 911 call, Or press DN + +

Page 17

Setting System Parameters

Emergency 911 Calls

To make an Emergency 911 call

1.Press [DN] + ￿￿￿ The [PDN] releases from the internal connection and seizes the CAMA trunk.

 

Note Once a 911 call is started, most other buttons/

 

keys on a telephone are disabled to prevent

 

accidentally dropping the 911 call attempt. This

 

includes the +ROG button, so that the 911 call

 

cannot be put on hold.

...or go off hook and

Off Hook and dial 911 (station has off hook selection

enter ￿￿￿

of a CO line or line group in Program 32 and has a CO

 

/LQH or 3RROHG￿/LQH buttons).

 

If your off hook selection automatically selects a /LQH￿

 

3RROHG￿/LQH button, then when you dial 911, the

 

normal CO line is dropped and an idle PDN or CAMA

 

CO button connects to the CAMA trunk.

 

If an idle [PDN] or CAMA CO button is not available,

 

the 911 call is sent out the originally selected line

 

without the station’s CESID information.

...or press [DN] + ￿ +

If the system uses Least Cost Routing (LCR) When

￿￿￿.

￿ is dialed, the station seizes LCR on its [PDN]. When

 

you enter ￿￿￿, the PDN drops LCR and the same

 

[PDN] connects to the CAMA trunk. 911 plus the

 

station’s CESID will be sent out the CAMA trunk.

Strata DK System Administrator Guide 5/00

7

Image 17
Contents System Administrator Guide Publication Information Contents Appendix a Access Codes Introduction Organization Equipment NotesConventions Important Notes Action/Response TableVii Related Documents and MediaViii Setting System Parameters Auto Attendant CO Line Assignments Auto AttendantSystem Auto Attendant Dialing Plan Auto Attendant Announcement Recording Recommendations To enter or change the Disa security code Direct Inward System Access Disa Security CodeEmergency 911 Calls To cancel the Disa security codeOr press DN + + To make an Emergency 911 callEmergency Calling from the Attendant Console Night Transfer Night Transfer Lock/Unlock PasswordTo enable/disable night transfer To assign or change Night Lock/Unlock Password To set the system in Night Lock Mode Night Transfer Lock ModeTo set the time Setting Date/Time/DayTo set the date To set the day of the week Station Relocation Soft KeysTo turn Soft Keys on To turn Soft Keys offTo physically relocate swap Station a and B To turn on the Auto Station Relocation featureAutomatic Relocation Relocation by Special Dial To turn on the Special Dial Station Relocation featureTo relocate swap Station a and B To write LCD messages, names, or numbers System Messages, Names and MemosUser LCD Name/Number Display To clear name/number display To enter name/number information for your telephoneTo enter name/number information for other stations/devices To erase name/number displayTo erase other station name/number displays Clearing a Speed Dial Entry System Speed Dial NumbersAccessing the Stored Number Speed Dial-Advanced FeaturesFeature Access Codes To store a feature onto a 6 buttonSetting System Parameters Feature Access Codes Features Feature Access Code Sequence Setting System Parameters To link system/system speed dial numbers Speed Dial Pause and Flash StorageSpeed Dial Number Linking Setting System Parameters Linked Speed Dial Example To program names and numbers Speed Dial MemoTo use the new link Enter up to To check a Speed Dial number To view and/or dial a Speed Dial numberDial tone ~ represent override Codes 1 and 2 respectively Toll Restriction Override/Traveling Class Codes~ or To add or change verified account codes Verified Account CodesTo delete verified account codes Setting System Parameters CO Line Access Codes Access CodesTo access a line Feature Access CodesPaging Group Codes To enter a paging group access codeRCTUBA/BB, RCTUC/D, B1CU Speed Dial Access CodesUser Name/Number Directory Directories/RecordBSpeed Dial Memo Directory Telephone Location Record Directories/Record Index Index ~ W Index