Last Number Redial
Press the TALK button, then press R/P button to redial the last number dialed.
CH Button
During the conversation, the phone will scan the clear channel automatically. If you still hear noise or static, press the CH button to find a clearer channel.
NOTE: It takes approximately 2 seconds for the unit to scan a channel.
Pause Function
This function allows you to insert a temporary pause during a dialing sequence. For example, when using a calling card, some telephone company systems will not register the entire number without inserting a pause between the card number and the telephone number. To insert a pause use the R/P button.
Battery Low warning and shut down protection
Once the battery voltage is low, the low battery icon will turn on. The low battery warning tone will also be generated if the handset is in talk mode. You can press TALK button to return to standby mode, then place the phone on the base to recharge.
Out of Range Warning
In talk mode, if the handset is too far away from the base unit, an out of range warning tone will be heard. You should move closer to the base unit. It not, the handset will automatically return to standby mode after about 20 seconds. When the handset makes a noise, press the button to return to standby mode.
Line Transfer
If extra handsets are set to the base unit:
1 During a phone conversation, press the SEL button and handset number. The line will be placed on hold, both handsets will ring. The caller will hear musical tones while on hold.
2Press the TALK button on the receiving handset to answer the call automatically after receiving the transfer ring.
3Press the TALK button to cancel the transfer if the other handset user does not want to answer the call during the transfer ring.
4If the two handsets do not respond with 30 seconds, the line will be disconnected automatically.