Topcom manual Register to a Topcom Butler E350 base

Topcom Butler E350/Twin/Triple/Quattro

7.3Calling a number from the call list

Scroll through the call list until the desired number is shown on the display ￿Press the off-

hook button . The number will be dialled automatically.

7.4Erasing a number from the call list

Scroll through the call list until the desired number is shown on the display ￿Press the menu

button and select ‘Delete’ ￿ Press OK after the confirmation request to confirm.

7.5Erasing all numbers from the call list

You can only erase all numbers from the call list if all are read.

Press the menu button and select ‘Delete All’ ￿Press OK after the confirmation request to confirm.

7.6Store a number from the call log into the phonebook memory

Scroll through the call list until the desired number is shown on the display ￿ Press the menu

button and select ‘Save’. ￿Edit the name if nessesary and press OK ￿Edit the number if nessesary and press OK.

8 Register to a Topcom Butler E350 base

You can subscribe 4 handsets to one base unit. By default, each handset is subscribed as handset 1 on the base unit upon delivery (base unit 1).

!!! You only need to subscribe the handset if:

•The handset subscription has been removed from the base unit (e.g. for reinitialisation)

•If you want to subscribe a different handset to this base unit.

The below procedure is only applicable to a Topcom Butler E350 handset and base unit!! Keep the Paging key on the base unit pressed for 4 seconds. During one minute the base unit is in register mode and you must do the following to subscribe the handset:

Press menu button ￿Use the button to scroll to ‘System’ and press

￿Select ‘Register’ ￿Enter the base PIN code (default=’0000’) and press . Enter the number of the base unit you would like to subscribe the handset to (1-4) ￿The unit will start searching for the base and when found it will register ￿If the PIN is wrong, the handset will restart the searching for the base ￿When the handset is registered, it will show the handset name and at the right the handset number.

8.1Selecting a base unit

You can switch your handset between different registered base units if you have registered a handset to more then one base. You can manually select the base unit or automatically let the handset choose the nearest base.

Press menu button ￿Use the button to scroll to ‘System’ and press

￿Select ‘Select base’ ￿Select ‘Auto’ or the base number (1-4) by the up/down /

keys and press .

12 Topcom Butler E350/Twin/Triple/Quattro