Topcom E350 manual Call transfer and intercom between two handsets, Removing a handset

Topcom Butler E350/Twin/Triple/Quattro

8.2Removing a handset

You can remove a handset from a base to allow another handset to be registered: Press menu button ￿Use the button to scroll to ‘System’ and press ￿Select ‘Delete HS’. Press OK and select the handset you which to remove (1-4) ￿Press

OK to confirm ￿Enter the PIN code (default=’0000’) and press .

You can only remove existing handsets and others then the one you are using.

9 Call transfer and intercom between two handsets

These functions only work when more then one handset (like a Twin/Triple/ Quattro version) is registered to the base!

9.1Call transfer and conference call during an external call

During an external call, press the INT key followed by the number (1-4) of the other handset.

￿The other handset will start to ring:

–When the other handset takes the line you can talk internally.

If you hang up, the external line will be connected with the other handset.

If you press and hold the INT key for 3 seconds you can talk with the 2nd handset and external line at the same time (conference call)

–Or press the INT key again to return to the external call.

￿Press ON-hook button to end the call.

9.2Internal call (intercom)

•In standby press the INT key followed by the number (1-4) of the other handset.

•The other handset will start to ring. You can stop the ringing by pressing the ON-hook

button .

•If the other handset answers the call by pressing the OFF-hook button you can talk internally.

•Press the ON-hook button to end the call.

ENGLISH

Topcom Butler ME350/Twin/Triple/Quattro 13