Topcom E350 manual Reset of the phone, Answering machine, LED display

Topcom Butler E350/Twin/Triple/Quattro

10 Reset of the phone

This will undo all changes and set back all default settings (ringer volume, ringer melody, etc...).

Press menu button ￿Scroll to ‘System’ and press ￿Scroll to ‘RESET’ and press OK ￿Enter the PIN code (default=’0000’) and press ￿The unit will go back to standby.

Default handset settings are:
Handset volume	3
Handset melody	3
Flash time	Recall 1
Dial mode	Tone
AutoAnswer	ON
Keypad tone	ON
Receiver volume	2
PIN code	‘0000’
ECO mode	OFF

All memories (redial, phonebook, call log,...) and handset name will not be erased!

11 Answering machine

The Butler E350 has a built-in digital answering machine with a recording capacity of

7 minutes The answering machine can be operated remotely and features the possibility of recording your own outgoing messages (OGM 1) (maximum of 40 seconds).

There are 2 possibilities:

•With OGM 1, the caller has the possibility to leave a message

•When memory is full, OGM 2 is activated. This pre-recorded outgoing message is

played without the caller having the opportunity to leave a message The max. recording time for each incoming message is 2 minutes

11.1 LED display

The LED display on the base indicates how many messages you have received. When there are new messages, the LED display on the base will blink and only indicate the amount of new messages. If the answering machine is switched off, the LED display does not light up. ‘FL’ will be shown on the display when the internal memory is full and no new messages can be recorded.

14 Topcom Butler E350/Twin/Triple/Quattro