Polk Audio 5000 manual Bar Controls, Bar Power Led, Source Led

SOURCE LED GUIDE 1 2 3 4 5

SOURCE 1

SOURCE 2

SOURCE 3

Bluetooth

LEARN SOURCE MUTE

FRONT

BAR CONTROLS

Front Panel:

1.Learn—Puts the bar into “learning mode” so you can program it to respond to commands from your existing remote control.

2.Source—Changes which input source you are listening to.

Source 1: digital/optical

Source 2: analog

Source 3: analog

Source 4 Bluetooth ( ): Bluetooth® wireless technology (See “PAIR AND CONNECT YOUR BLUETOOTH DEVICE WITH THE SURROUNDBAR” on page 8.)

LED—Blue light indicates which Source has been selected (see Source LED Guide above). Source 1 LED will light green if Dolby Digital signal is being decoded.

3.Power ()—Turns on the bar or puts it in standby mode.

POWER	20V
	2.2A		SOURCE	SYNC
	OFF
	ON	1	2	3
	44W
6	7	BACK	8	9

BAR POWER ( ) LED

Normal Operating Mode:

Green Steady—Power is on; all is well.

Red Steady—The bar is in standby mode.

Green Two Blinks—A remote control or keypad operation signal is received successfully.

Green Slow Blinking—System is muted.

Green Fast Blinking (After pressing volume up button)—You have reached the maximum volume.

Green Fast Blinking (At power up)—The bar and subwoofer have established a wireless connection.

BAR POWER ( ) LED

LED—A light that shines green, orange or red to indicate operating status.

4.Mute—Mutes and unmutes the sound coming from the SurroundBar 5000 IHT, indicated by green slow flash.

5.Volume Up and Down ( / )—Adjusts the volume of the SurroundBar 5000 IHT.

Back Panel:

6.Power Switch—Turnsthe bar on or off, but you can leave it on all the time.

7.Power Connection—The bar power supply connects here.

8.Audio Inputs (Source 1, 2, or 3)—Where you connect your TV (or other sources) to the SurroundBar 5000. Use the 6' optical cable (Source 1) provided or 1/8" analog cable (Source 2 or 3) provided.

9.SYNC—The SYNC button ensures the subwoofer and bar are communicating. (See “SYNCING THE BAR AND WIRELESS SUBWOOFER” on page 7.)

Learning Mode: (See page 10 for instructions.)

Orange Blinking—The bar is in learning mode.

Orange Steady—The bar is in learning mode and a function has been selected.

Green Blinking—The bar has successfully learned a remote control command.

Red Blinking—The bar has failed to learn a remote control command.

Red and Orange Blinking—Learned IR codes

have been successfully erased.

SOURCE LED

Green Blinking—Dolby Digital source recognized (Source 1 only).

Green Steady—Dolby Digital source received and is being decoded (Source 1 only).

Blue Steady—PCM or analog source received.

4 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)