Black Box FX160A manual Outside Line Guard Time, Pulse-Dialing Timing

PHONE LINE MANAGER 16 X 4

19.7 Outside Line Guard Time

Once an outside call is complete (that is, one of the parties hangs up), that particular outside line is inactive for a defined period of time. This gives the Central Office an on hook condition for this amount of time.

6.Enter the “outside line guard time” code:

0 0.75 seconds

11.5 seconds

*2 2.25 seconds

33 seconds

43.75 seconds

54.5 seconds

65.25 seconds

76 seconds

86.75 seconds

97.5 seconds

19.8 Pulse-Dialing Timing

These settings relate to pulse-mode dialing only. Break time is the time for generating a single pulse; it is the amount of time the line goes on-hook to send a dial pulse. Make time is the off-hook time between dial pulses.

7.Enter the “pulse dialing break time” code:

0 48 milliseconds

1 56 milliseconds

*2 64 milliseconds

3 72 milliseconds

4 80 milliseconds

5 88 milliseconds

6 96 milliseconds

7 104 milliseconds

8 112 milliseconds

9 120 milliseconds

59