Black Box FX160A manual Metering Pulse Detection, Metering Pulse Frequency, Caller ID

Page 38

PHONE LINE MANAGER 16 X 4

12.3 Metering Pulse Detection

Some Central Office switches (mostly outside of the USA) send 12- or 16-KHz metering pulses to indicate to the system that a unit of connection time has been used. These pulses can be counted by the Phone Line Manager 16 x 4 and appear as part of the Call History record output. If your unit is equipped with the metering pulse-detection hardware, this command will enable the detection of the metering pulses.

To Enable metering:

1.In the programming mode, enter 7816. Pause for confirmation tone. Hang up or continue with programming.

To Disable metering:

1.In the programming mode, enter 7817. Pause for confirmation tone. Hang up or continue with programming.

12.4 Metering Pulse Frequency

If metering is enabled, you must select either 12- or 16-KHz as the frequency to be detected.

To select 16-KHz as the metering frequency:

1.In the programming mode, enter 7818. Pause for confirmation tone. Hang up or continue with programming.

To select 12 KHz as the metering frequency:

1.In the programming mode, enter 7819. Pause for confirmation tone. Hang up or continue with programming.

12.5 Caller ID

If your Phone Line Manager 16 x 4 is equipped with the optional Caller ID feature, this parameter should be enabled to allow the Phone Line Manager 16 x 4 to capture the Caller ID data sent by the Central Office switch between the first and second ring of an incoming call. This information will be output on the RS- 232C port of the system to a computer equipped with appropriate translation and display software. The RS- 232 port must be in the “Features Mode” to allow the information to be output normally or in the “System Mode” to allow the information to be transmitted via the CAT interface, if your Phone Line Manager 16 x 4 is equipped with the CAT version of the software.

To enable Caller ID detection:

1.In the programming mode, enter 7828. Pause for confirmation tone. Hang up or continue with programming.

To disable Caller ID detection:

1.In the programming mode, enter 7829. Pause for confirmation tone. Hang up or continue with programming.

It is also possible to display the Caller ID information on the LCD screen of the Key Phones. The BK-416 EX series of key phones can display the incoming call number while the AVT-16 series of key phones can display both name and number.

39

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Phone Line Manager 16 x Mexicanas Electrical Safety Statement Phone Line Manager 16 X Contents Contents Phone Line Manager 16 X Specifications Introduction Designate an Extension for System Manager Choosing the Programming Mode-Automatic or PasswordPreparing to Program Advanced System Features Factory-Default SettingsBasic Features Programming TipsOutside Line Features Extension Features for all extensionsResetting the System to Default Values Entering the Programming-Mode PasswordChanging the Programming-Mode Password When You Reset the System to Default ValuesWhich special features do you want to allow the extension? Configuring the ExtensionsChoices When Programming the Extensions What type of phone will be connected to the extension?Programming the Extensions Automatic Outside Door-Phone-Operation Details Require Star Key Before User Programming To disable the Call Follow Me functionCall Forwarding/Call Follow Me To require a * to be entered before a 4 or aChoices in Handling Incoming Calls Central Office Lines Incoming CallsIntroduction Defining the Standard Incoming Line Extension Numbers Entering the Private Incoming Lists Day Night Choices in Configuring Central Office CO Lines Central Office Lines ProgrammingTo access an outside line by dialing Dialing 9 to Access Outside LinesDo you want to dial 9 or 0 to access an outside line ? Programming Outside LinesEnter Enter Line # Code Fax Extn Recording a Voice Announcement About Disa and Direct Caller Access to ExtensionsAuto-Attendant Disa 1xxWhat Happens after the Disa Entry Setting the Length of the Disa Input TimeEnabling the Voice Announcement To ring the Operator if there is No Disa entry What Happens If There is No Disa EntryMultiple Fax Extensions To ring the fax extension if there is No Disa entryAbout Outgoing Call Groups Defining Outgoing Call GroupsAssigning Extensions to an Outgoing Call Group Entering the Dosa Password Direct Outward Station Access DosaEnable Direct Outward Station Access Dosa To Disable Hunt Groups To Enable the Use of the Four Different Hunt GroupsTo Enable Hunt Groups Hunt GroupsThen dial 12 13 14 Then dial 01 03 04Then dial 05 06 06 Then dial 00 00 00To enable automatic switching between modes Automatic Day/Night Mode SwitchingAutomatic Day/Night Mode Switching Times To disable automatic switching between modesPhone Line Manager 16 X Central Office Lines Advanced Topics Tone- or Pulse-Dialing DetailsTo Enable Clear Forward Detection To Enable Polarity Reversal DetectionTo Disable Polarity Reversal Detection To Disable Clear Forward DetectionCaller ID Metering Pulse DetectionMetering Pulse Frequency Phone Line Manager 16 X Rollover Extensions Advanced Topics Exclusive Answering Machine PrivilegeTo transfer unattached calls to the Operator Rollover of Intercom CallsRollover of Unattached Calls MSG Button on a Key Phone Voice-Mail Unit InterfaceSimplified Voice-Mail Interface Call-Barring Toll-Restriction Details Call Barring Toll RestrictionAbout Call Barring To fill a Call-Barring Allow or Disallow Table Filling the Call-Barring Allow and Disallow TablesSample Disallow Table Sample Allow Table Assigning Extensions to TablesPassword to Override Call Barring Restrict Calls at NightAssigning Speed-Dial Numbers To enter a speed-dial numberClear Speed-Dialing and Call-Barring Tables Dial-Tone DetectionTo display the time in the 24-hour mode Setting the System ClockTo display the time in the 12-hour mode System Clock Date and TimeOutgoing-Call Records and Histories Formats for the Call-History Records Output the Call History After Each Outgoing CallAutomatic Call-History Retrieval Program Connection to a Computer or a Printer To enable the Features Mode of the RS-232C Port 18.1 RS-232C Port-Choosing the Operating ModeTo enable the System Mode of the RS-232C Port Interfacing the Phone Line Manager 16 x 4 to a ComputerPhone Line Manager 16 x 4 Configuration Program Report Disa Digits to the CAT Application To enable the normal mode of Disa operationComputer Aided Telephony CAT Software To report incoming Disa digits to the CAT ApplicationSystem Timing Parameters Delay After Each RS-232C CharacterDelay After Each RS232C Line About System Timing ParametersSwitchhook Flash Timing Reminder Feature TimingOutside Line Guard Time Pulse-Dialing TimingTone Dtmf Dialing Timing Switchhook Timing to Outside Line Rollover on Standard Incoming Calls Timing Rollover After Call to ExtensionOn Hook Time Speed-Dialing Delay Time Multiple Ringing TimeParked Calls Timing Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax
Top Page Image Contents