Avaya 700217243 manual Backup Programming-Automatic #123

Page 65

Quick Reference Guide	6 Maintaining Your System

Backup Programming–Automatic (#123)

Use this feature to set up the automatic backup of all programming (except the system date, day, and time). When Backup Programming–Automatic is set to Active, the information is backed up at 2:00 a.m. on the first day of each month to a Backup/Restore PC Card.

If Backup Programming–Automatic is Active and an automatic backup fails, a Backup-Failure Alarm message appears (instead of the system date and time) on the top line of the telephone display at idle Extensions 10 and 11.

See Chapter 7, “If Something Doesn’t Work’ for an explanation of these messages and suggested corrective actions, and for the procedure for clearing the Backup-Failure Alarm message.

To change the setting for Backup Programming–Automatic:

1Check that only one Backup/Restore PC Card is in the processor module.

2Press f00ss#123at extension 10 or 11.

3To change the setting, press Dor duntil the setting you want appears, or press rto return the setting to the factory setting. The possible settings are:

•1 = Active

•2 = Not Active (the factory setting) ✔

•3 = Backup Alarm Cleared

4Exit programming mode.

For information about using Option 3, Backup Alarm Cleared, see “Clearing a Backup-Failure Alarm” on page 74.

Backup and Restore 55

Image 65

Contents Partner Page Copyright Document Avaya Inc Obtaining Products Important Safety Instructions Page Wed like your opinion Page Contents System Programming Flow Charts Programming Telephone FeaturesMaintaining Your System If Something Doesn’t WorkSystem Overview WelcomeSystem Configurations System Components System CapacitySystem Description Components Opre Auxiliary EquipmentGetting Acquainted Overview Installing Your SystemEvaluating the Environment Installing the Control UnitGo to the next procedure, Labeling Jacks, on Wall-Mounting a 5-Slot Carrier and Modules Labeling Jacks Inserting Batteries in the Processor Module Grounding the SystemQuick Reference Guide Initializing the System Checking the LEDs Connecting Lines and Extensions Installing Telephones Installing the CoverConnecting Auxiliary Equipment System Programming Basics Setting Up Your SystemSetting Up Your System Programming Overlays Button Locations Button Locations on Partner Telephones Changing Programming Type Programming ModeUsing Centralized Telephone Programming System Day #102, Release 2.0 and Earlier Setting the Date, Day, and TimeSystem Date #101 System Time #103 Automatic Daylight/Standard Times #126 Assigning LinesCustomizing Extensions Copy Settings #399 Dialing Restrictions Changing Settings to Support PBX or Centrex ServicesRecall Setting Speed Dial and Auto Dial Numbers Emergency Phone Number List #406Programming for Voice Messaging Systems Voice Messaging SystemsSetting Up Your System Additional Voice Messaging System Programming Setting Up Your System System Speed Dial Programming System Features5554757 Dialing Restrictions and PermissionsSecurity Alert Allowed Phone Number Lists #407Allowed List Assignments #408 Disallowed Phone Number Lists #404 Disallowed List Assignments #405 Line Access Restriction #302Current restriction appears Outgoing Call Restriction #401 Group...Description Groups of ExtensionsProgramming System Features Automatic Line Selection Programming Telephone FeaturesProgramming Telephone Features Letters Numbers Extension Name DisplayLine Ringing Quick Reference Guide Programming Telephone Features Maintaining Your System Backup and Restore Backup Programming-Automatic #123 Backup Programming-Manual #124 Restore Programming #125 Maintaining Your System Battery Replacement Using a PC Card Quick Reference Guide Check the LEDs Upgrading 1600 DSL and 012E Module FirmwareAdding New Modules Maintaining Your System Replacing Modules Maintaining Your System Replacing Modules in a 5-Slot Carrier Maintaining Your System Changing the System Clock Changing System SettingsAdding Lines, Pools, and Extensions Key Extensions Adding New LinesAdding New Extensions Adding New PoolsSwapping Extensions Your Release Number If Something Doesn’t WorkPress f00ss#123 Clearing a Backup-Failure Alarm012E Module Power Management Problem Check this Telephone ProblemsProblem Check this Telephone Doesn’t Work on Calling ProblemsProblem Check this System Problems ATM DSL Module ProblemsTip/Ring Device Problems System Programming Flow Chart-How to Use System Flow Chart-System System Flow Chart-Lines System Flow Chart-System Speed Dial NumbersSystem Flow Chart-Extensions Copy Settings Line Access ModeCall Waiting Pool Extension AssignmentSystem Flow Chart-Dialing Restrictions and Permissions System Flow Chart-Groups System Flow Chart-Auxiliary Equipment To Program Another Feature at the Same Extension Centralized Telephone Programming Flow Chart-How to UseTo Change Setting for Another Extension To Erase a Feature or Auto Dial ButtonCentralized Telephone Programming Flow Chart Manual Signaling For voice signaling the first available extensionTouch-Tone Enable Contact ClosureExtension Telephone Programming Flow Chart-How to Use Caller ID Inspect Extension Telephone Programming Flow ChartRecord-A-Call Group Hunting-Ring/Voice SignalLoudspeaker Paging